Premium Stock

Alien Xenomorph Attack 3D Printing Figurine | Assembly

(2)
cm: 56.1 w x 18.8 d x 28.5 h
in: 22.087 w x 7.402 d x 11.22 h

Source Files

|

Description

|

Printing Details

This 3D figurine of Alien Xenomorph Attack consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 4 versions of Alien Xenomorph Attack STL files for FFF/FDM, DLP/SLA, DLP/SLA Eco, SLS - files for all versions are available for download after the purchase;
  • STL files of high-poly Alien Xenomorph Attack Figurine for 3D printing consist of 56 files;
  • Sizes for:
  • FFF/FDM: 285 mm tall, 561 mm wide, 188 mm deep;
  • DLP/SLA/SLS: 143 mm tall, 280 mm wide, 94 mm deep;
  • Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
  • Detailed settings that we provide as a recommendation for Cura, Simplify3D, Slic3r and PrusaSlicer for the best print;
  • Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_FDM(repaired).stl
38.89 MiB 16 h 34 min 11 m 71 x 134 x 65 Download
2_body_FDM(repaired).stl
47.31 MiB 28 h 37 min 19 m 70 x 72 x 136 Download
3_arm_R_FDM(repaired).stl
28.03 MiB 6 h 24 min 4 m 62 x 49 x 96 Download
4_hand_R_FDM(repaired).st l
20.86 MiB 3 h 13 min 2 m 60 x 33 x 67 Download
5_spike_for_arm_R_FDM(rep aired).stl
6.51 MiB 14 min <1 m 16 x 12 x 14 Download
6_arm_L_FDM(repaired).stl
29.43 MiB 6 h 12 min 4 m 74 x 35 x 110 Download
7_hand_L_FDM(repaired).st l
18.03 MiB 3 h 20 min 2 m 58 x 36 x 71 Download
8_spike_for_arm_L_FDM(rep aired).stl
7.03 MiB 14 min <1 m 18 x 11 x 14 Download
9_leg_R_FDM(repaired).stl
31.02 MiB 10 h 9 min 6 m 74 x 75 x 64 Download
10_foot_R_FDM(repaired).s tl
30.39 MiB 7 h 42 min 5 m 97 x 48 x 88 Download
11_leg_L_FDM(repaired).st l
32.88 MiB 11 h 51 min 7 m 61 x 89 x 77 Download
12_foot_L_FDM(repaired).s tl
28.80 MiB 6 h 57 min 5 m 72 x 96 x 86 Download
13_tail_1_FDM(repaired).s tl
29.88 MiB 10 h 17 min 7 m 79 x 47 x 79 Download
14_tail_2_FDM(repaired).s tl
28.37 MiB 13 h 31 min 8 m 29 x 46 x 154 Download
15_tail_3_FDM(repaired).s tl
29.05 MiB 8 h 14 min 5 m 69 x 19 x 131 Download
16_tail_4_FDM(repaired).s tl
27.79 MiB 2 h 20 min 1 m 49 x 15 x 101 Download
17_spike_1_FDM(repaired). stl
17.58 MiB 3 h 37 min 2 m 69 x 51 x 83 Download
18_spike_2_FDM(repaired). stl
9.36 MiB 1 h 17 min 1 m 17 x 48 x 62 Download
19_spike_3_FDM(repaired). stl
9.58 MiB 1 h 3 min <1 m 16 x 35 x 72 Download
20_spike_4_FDM(repaired). stl
6.27 MiB 5 min <1 m 6 x 11 x 24 Download
21_spike_5_FDM(repaired). stl
6.20 MiB 5 min <1 m 10 x 5 x 24 Download
22_platform_1_FDM(repaire d).stl
30.72 MiB 32 h 8 min 18 m 109 x 145 x 36 Download
23_platform_2_FDM(repaire d).stl
31.24 MiB 30 h 15 min 17 m 105 x 145 x 36 Download
24_platform_3_FDM(repaire d).stl
29.80 MiB 8 h 22 min 5 m 149 x 149 x 51 Download
25_ge_lock_10H(x13)_FDM(r epaired).stl
0.03 MiB 4 min <1 m 18 x 10 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min 1 m 150 x 18 x 5 Download
...

ABOUT THIS 3D MODEL

The menacing extraterrestrial species Xenomorph is one of the deadliest of all known aliens and is said to be the perfect killing machine. The hostile antagonist was first seen in 1979 in the sci-fi horror classic Alien and since that time has the fame of one of the most hazardous and terrific monsters in the history of cinematography. After the debut in Alien, Xenomorphs reappeared in several sequels and prequels and the subsequent video games.

The author of the figurine could not leave without attention this impressive Alien character and developed stunning work depicting the  Xenomorph in attack. The posture of the figurine reveals its bloodlust and hostility: the arms of the Xenomorph are outstretched revealing the razor claws serving as a weapon to eliminate their prey, and the sharp teeth and razor tail pose the same danger. Looking at the mouth of Alien you can almost hear a scream breaking from its throat. The massive double-jointed legs of the Alien, its large elongated head, dorsal thick spikes, and the ridged body - each detail shows the attentiveness of the author to the work, and their intention to maintain the proportions and reflect the textures as closely as possible. 3D printing the Alien Xenomorph Attack will help one to see how modern technologies and the genius of the author allow us to bring to life the most esteemed and iconic characters!

ADAPTATION FOR 3D PRINTING

Alien Xenomorph Attack for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 65 hours in total. The figurines' anatomy and proportions were thoroughly reviewed during the moderation process for the creature to be depicted harmoniously in the intended pose.

The figurine’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the figurine are connected, the figurine was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and "Assembly Manual" before getting down to Alien Xenomorph Attack.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The figurine’s scale was calculated from the height of the creature which is 2200 mm. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 versions features:

  • Contains 25 parts;
  • A printed figurine is 285 mm tall, 561 mm wide, 188 mm deep;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 versions features:

  • Contains 14 parts;
  • A printed figurine is 143 mm tall, 280 mm wide, 94 mm deep;
  • All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 versions features:

  • Contains 14 parts;
  • A printed figurine is 143 mm tall, 280 mm wide, 94 mm deep;
  • Some parts are manually hollowed out to save resin.

SLS 1.0 versions features:

  • Contains 3 parts - a solid Alien Xenomorph Attack figurine on and separately from the platform.

You can get the figurine of Alien Xenomorph Attack for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Alien Xenomorph Attack 3D Printing Figurine on Gambody YouTube channel.

Also, you may like Alien Birth 3D Printing Figurine and other Horror 3D Printing Figurines.

_______

FAQ: 

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

  • You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
  • All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings