King Ghidorah 2019 3D Printing Figurine | Assembly

ABOUT THIS 3D MODEL

King Ghidorah is a fictional monster in the Godzilla franchise, created by Toho Studios. He first appeared in the 1964 film Ghidorah, the Three-Headed Monster, and has since become one of the series's most iconic and beloved kaiju (giant monsters).

In the 2019 film, Godzilla: King of the Monsters, King Ghidorah is portrayed as a powerful, extraterrestrial monster that awakens from its icy slumber in Antarctica. The beast is initially discovered by a group of eco-terrorists, who plan to use it to restore balance to the Earth's ecosystem by unleashing it and other kaiju upon the world.

However, King Ghidorah proves to be uncontrollable and begins wreaking havoc across the globe. The only hope for humanity is Godzilla, who emerges from the depths of the ocean to face off against King Ghidorah in a titanic battle for the fate of the planet.

Throughout the film, King Ghidorah is portrayed as a nearly invincible opponent, with his three heads able to unleash devastating blasts of lightning that can level entire cities. He is also shown to have regenerative abilities, making him incredibly difficult to defeat.

ADAPTATION FOR 3D PRINTING

King Ghidorah for 3D printing is an assembly figurine and its moderation and adaptation for different types of 3D printers took the Gambody team 60 hours in total. For you to receive the cleanest 3D printing result possible and to minimize the amount of filament needed for generated support the model was divided into many assembly parts. All assembly parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive the "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly video” and "Assembly Manual" before getting down to the King Ghidorah model.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown. The model’s scale was calculated from the height of King Ghidorah which is 200000 mm. The 3D printing model’s chosen scale is 1:250 for the FFF/FDM version and 1:500 for the DLP/SLA version.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:

- Contains 100 parts;

- A printed model is 880 mm tall, 1324 mm wide, 724 mm deep;

- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:

- Contains 49 parts;

- A printed model on stand 440 mm tall, 662 mm wide, 362 mm deep;

- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:

- Contains 49 parts;

- A printed model on stand 440 mm tall, 662 mm wide, 362 mm deep;

- Some parts are manually hollowed out to save resin.

SLS version features:

-  Contains 2 parts - a solid King Ghidorah figurine and the platform.

You can get the model of King Ghidorah for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble King Ghidorah 2019 3D Printing Model at Gambody YouTube channel.

Also, you may like other Kaiju 3D Printing Models and Godzilla, as well as Mecha King-Ghidorah 3D Printing Figurine.

_______

FAQ: 

Where can I print a model if I have no printer?

How to get started with 3D printing?

How to set up my 3D printer?

How to choose right 3D model print bed positioning? 

How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

• You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
• All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download