Mad Cat Classic Mech 3D Printing Model | Assembly + Action

ABOUT THIS 3D MODEL

MadCat is a fast heavy MechWarrior that was first introduced in 2945 as a representative of the OmniMech Clan. Its design is so remarkable and distinctive that it has eventually become emblematic of the BattleTech universe in general. Though its official name is Timber Wolf, the deadly Mech is widely known as MadCat bearing a certain resemblance both to Marauder (Mad) and Catapult (Cat). The first time the nickname was designated to the Mech was when Inner Sphere’s targeting computer couldn’t identify it between the two. MadCat is actually much more powerful than both MechWarriors. Hardly had it been created when Clan Wolf as well as any other Clan immediately understood its great value. Timber Wolf can boast an impressive combination of energy and missile weaponry that guarantees considerable firepower during the hottest of confrontations.

The new MadCat model was designed by another 3D artist and is completely reworked. The model has canonical design configurations, a detailed interior with a pilot's seat, optional glass or plastic windows and tunnels for LED wiring to lighten-up engines and cockpit. The articulation of the MadCat Classic Mech is provided by new, more secure, and durable joints. MadCat Classic Mech will steal the heart of every BattleMech fan!

ADAPTATION FOR 3D PRINTING

MadCat Classic Mech for 3D printing is a fully active assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 47 hours in total.

For you to receive the cleanest 3D printing result possible, minimize the amount of filament needed for generated support, and make use of the active elements designed by Gambody Engineers, the Mech was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won’t face difficulties when placing the parts on a build plate. When downloading any model’s file you will also receive “Assembly Manual” for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and “Assembly Manual” before getting down to the MadCat Classic Mech model.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model’s scale was calculated from the length of the MadCat Classic Mech which is 12600 mm. The 3D printing model’s chosen scales are 1:60 for the FFF/FDM version and 1:100 for the DLP/SLA version.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 version features:

• Contains 61 parts;
• A printed model is 217 mm tall, 161 mm wide, 117 mm deep;
• A printed model on the platform is 233 mm tall, 229 mm wide, 229 mm deep;
• Detailed cockpit interior and missile compartment;
• Optional glass or plastic windows;
• Articulated toes;
• Knees bend, ankle joints move freely;
• Active hip joints;
• Rotating torso;
• Battery compartment hidden under the back cover;
• Removable cap to access the cockpit;
• Removable cap to access missile compartment;
• Two cockpit cover options: with and without the emblem;
• Detachable missiles system;
• Tunnels for LED wiring are provided to the cockpit and the back of the engine;
• All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:

• Contains 42 parts;
• A printed model is 130 mm tall, 97 wide, 70 mm deep;
• A printed model on the platform is 138 mm tall, 132 wide, 133 mm deep;
• Detailed cockpit interior and missile compartment;
• Optional glass or plastic windows;
• Articulated toes;
• Knees bend, ankle joints move freely;
• Active hip joints;
• Rotating torso;
• Battery compartment hidden under the back cover;
• Removable cap to access the cockpit;
• Removable cap to access missile compartment;
• Two cockpit cover options: with and without the emblem;
• Detachable missiles system;
• Tunnels for LED wiring are provided to the cockpit and the back of the engine;
• All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

You can get the model of MadCat Classic Mech for 3D printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble the MadCat Classic Mech 3D Printing Model on Gambody YouTube channel.

Also, you may like the MWO Timber Wolf and Mad Cat MkII 3D Printing Models, and other Mech models and figurines for 3D Printing.

_______

FAQ: 

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning? 
• How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

• You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
• All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download