Premium Stock

Warbat 3D Printing Figurine | Assembly

(3)
cm: 54.3 w x 28.8 d x 29 h
in: 21.378 w x 11.339 d x 11.417 h

Source Files

|

Description

|

Printing Details

This 3D model of Warbat consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 4 versions of Warbat STL files for FFF/FDM, DLP/SLA, DLP/SLA Eco, SLS - files for all versions are available for download after the purchase;
  • STL files of high-poly Warbat Figurine for 3D printing consist of 66 files;
  • Sizes for:
  • FFF/FDM: 290 mm tall, 543 mm wide, 288 mm deep;
  • DLP/SLA/SLS: 145 mm tall, 272 wide, 144 mm deep;
  • Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
  • Detailed settings that we provide as a recommendation for Cura, Simplify3D, Slic3r and PrusaSlicer for the best print;
  • Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_FDM(repaired).stl
39.08 MiB 6 h 40 min 5 m 52 x 63 x 81 Download
2_body_FDM(repaired).stl
29.05 MiB 10 h 32 min 7 m 41 x 61 x 78 Download
3_tail_1_FDM(repaired).st l
40.64 MiB 23 h 50 min 16 m 89 x 80 x 128 Download
4_tail_2_FDM(repaired).st l
30.02 MiB 11 h 33 min 8 m 59 x 72 x 81 Download
5_tail_3_FDM(repaired).st l
27.97 MiB 9 h 59 min 7 m 54 x 71 x 90 Download
6_tail_4_FDM(repaired).st l
22.15 MiB 8 h 59 min 6 m 64 x 66 x 96 Download
7_tail_5_FDM(repaired).st l
21.09 MiB 5 h 39 min 4 m 39 x 57 x 95 Download
8_tail_6_FDM(repaired).st l
24.35 MiB 5 h 7 min 4 m 34 x 56 x 81 Download
9_tail_7_FDM(repaired).st l
19.05 MiB 1 h 37 min 1 m 64 x 30 x 42 Download
10_wing_R_1_FDM(repaired) .stl
38.16 MiB 19 h 10 min 12 m 111 x 88 x 118 Download
11_wing_R_2_FDM(repaired) .stl
36.87 MiB 27 h 21 min 21 m 108 x 112 x 136 Download
12_claw_R_1_FDM(repaired) .stl
2.84 MiB 15 min <1 m 7 x 18 x 16 Download
13_claw_R_2_FDM(repaired) .stl
5.58 MiB 34 min <1 m 22 x 24 x 33 Download
14_claw_R_3_FDM(repaired) .stl
4.13 MiB 21 min <1 m 16 x 18 x 19 Download
15_claw_R_4_FDM(repaired) .stl
3.15 MiB 16 min <1 m 19 x 8 x 17 Download
16_claw_R_5_FDM(repaired) .stl
1.26 MiB 10 min <1 m 10 x 9 x 15 Download
17_claw_R_6_FDM(repaired) .stl
2.22 MiB 8 min <1 m 5 x 10 x 15 Download
18_wing_L_1_FDM(repaired) .stl
33.81 MiB 18 h 43 min 11 m 119 x 87 x 114 Download
19_wing_L_2_FDM(repaired) .stl
32.34 MiB 21 h 20 min 15 m 92 x 107 x 142 Download
20_claw_L_1_FDM(repaired) .stl
6.41 MiB 37 min <1 m 9 x 36 x 38 Download
21_claw_L_2_FDM(repaired) .stl
5.02 MiB 33 min <1 m 29 x 15 x 32 Download
22_claw_L_3_FDM(repaired) .stl
4.99 MiB 19 min <1 m 24 x 9 x 19 Download
23_claw_L_4_FDM(repaired) .stl
3.33 MiB 13 min <1 m 11 x 17 x 14 Download
24_claw_L_5_FDM(repaired) .stl
3.71 MiB 6 min <1 m 5 x 12 x 10 Download
25_claw_L_6_FDM(repaired) .stl
2.10 MiB 5 min <1 m 9 x 5 x 11 Download
26_platform_1_FDM(repaire d).stl
22.41 MiB 14 h 21 min 8 m 155 x 111 x 26 Download
27_platform_2_FDM(repaire d).stl
21.09 MiB 14 h 26 min 8 m 110 x 154 x 37 Download
28_platform_3_FDM(repaire d).stl
21.78 MiB 13 h 49 min 8 m 156 x 111 x 27 Download
29_platform_4_FDM(repaire d).stl
21.78 MiB 13 h 39 min 8 m 110 x 156 x 24 Download
30_ge_lock_10H(x14)_FDM(r epaired).stl
0.03 MiB 4 min <1 m 18 x 10 x 2 Download
31_ge_lock_7S(x5)_FDM(rep aired).stl
0.02 MiB 4 min <1 m 7 x 18 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min 1 m 150 x 18 x 5 Download
...

ABOUT THIS 3D MODEL

Snake-like kaiju Warbat first appeared in 2021 in Godzilla vs. Kong and impressed everyone with their exceptional appearance and wild temper. The winged reptiles, also known as Nozuki, glide through the air and display outstanding maneuverability, capabilities that in addition to high speed make them particularly dangerous. These giant flying beasts rapidly attacked the guardian of Skull Island, powerful and aggressive Kong, using their long serpentine bodies and membranous wings to strangle their enemy. 

Inspired by the iconic movie scene with Warbats, our contributing 3D artist designed this figurine for 3D printing portraying the iconic daikaiju in all its glory. The monster has the torso and a head of a snake; the large wings running down the top half of its body and the exceptional size of the creature testify to the uniqueness of Warbat. The attacking posture of the monster reveals the fierceness and savageness of the character. Warbat is a must for every fan of the Godzilla franchise, it will make your collection simply unrivaled!

ADAPTATION FOR 3D PRINTING

Warbat for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 67 hours in total. The figurines' anatomy and proportions were thoroughly reviewed during the moderation process for the beast to be depicted harmoniously in the intended pose.

The figurine’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the figurine are connected, Warbat was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and "Assembly Manual" before getting down to Warbat.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The figurine’s scale was calculated from the height of Warbat. The 3D printing figurine’s chosen scales are 1:250 for the FFF/FDM version and 1:500 for the DLP/SLA/SLS versions.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 versions features:

  • Contains 31 parts;
  • A printed figurine is 290 mm tall, 543 mm wide, 288 mm deep;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 versions features:

  • Contains 16 parts;
  • A printed figurine is 145 mm tall, 272 wide, 144 mm deep;
  • All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 versions features:

  • Contains 16 parts;
  • A printed figurine is 145 mm tall, 272 wide, 144 mm deep;
  • Some parts are manually hollowed out to save resin.

SLS 1.0 versions features:

  • Contains 3 parts - a solid Warbat figurine on and separately from the platform.

You can get the model of Warbat for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Warbat 3D Printing Figurine on Gambody YouTube channel.

Also, you may like Kong 3D Printing Figurine and other Kaiju Figurines for 3D Printing.

_______

FAQ: 


Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

  • You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
  • All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings