Community (fb) 
es 
ua 
Files
3D model format
Stereolithography (.stl)
Total files
Slicer settings
not available
Mesh error check
not specified
Support
Lifetime support from Gambody team
Update requests
not specified
Model versions
FFF/FDM
Assembly method
not specified
Features
DLP/SLA
Assembly method
not specified
Features
Additional details
Part of diorama
No
Special pack included
No
You will get instant access to the STL files of Type-6 Shuttlecraft 3D Printer Files | Assembly after completing your purchase. Simply add the model to your cart and check out using PayPal, credit or debit card, Apple Pay, Google Pay, Alipay, or other available payment methods.
Watch the assembly video for Type-6 Shuttlecraft 3D Printer Files | Assembly, and explore more tutorials, behind-the-scenes content, 3D printing timelapses, and painting guides on the official Gambody YouTube channel.
This 3D printing design of Enterprise D Shuttlecraft Type-6 from Star Trek consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.
Before printing the files, we strongly recommend reading the PRINTING DETAILS section.
WHAT WILL YOU GET AFTER PURCHASE?
- 2 versions of Type-6 Shuttlecraft STL files for FFF/FDM and DLP/SLA— files for all versions are available for download after the purchase;
- STL files of high-poly Type-6 Shuttlecraft model for 3D printing consist of 123 files;
- Sizes for:
- FFF/FDM: 194 mm tall, 283 mm wide, 397 mm deep;
- FFF/FDM on a platform: 298 mm tall, 283 mm wide, 397 mm deep;
- DLP/SLA: 97 mm tall, 142 mm wide, 198 mm deep;
- DLP/SLA on a platform: 149 mm tall, 142 mm wide, 198 mm deep;
- Assembly Manual for 1.0 FFF/FDM and 1.0 DLP/SLA versions in PDF and video formats;
- Detailed settings that we provide as a recommendation for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer for the best print;
- Full technical support from the Gambody Support Team.
Detailed information about these 3D printer STL files is available in the DESCRIPTION section.
Before printing, take a look at Printing Details for recommended settings and tips to achieve better results.
ABOUT THIS 3D MODEL
A vital component of exploration and diplomacy in the Star Trek universe, the Type 6 Shuttlecraft served as the workhorse of Starfleet during the Star Trek: The Next Generation era. Capable of short warp jumps, this versatile spacecraft was essential for transporting personnel, delivering supplies, and executing critical away missions from starships like the iconic USS Enterprise NCC-1701-D. Known for its reliability and practical design, the Federation Shuttlecraft was a familiar sight launching from the Enterprise's shuttle bay, playing a crucial role in countless encounters and explorations throughout the galaxy. It represents the unsung hero of short-range interstellar travel for Star Trek.
Now you can bring this essential part of the Star Trek experience to your display with the Star Trek Type 6 Shuttlecraft 3D model. Our contributing artist has created this spacecraft 3D model, capturing its distinctive shape and functionality. The model features an opening rear door providing access to the interior, adding a layer of realism and display potential. For added immersion, it includes integrated tunnels for LED lighting, allowing you to illuminate the engines, cockpit instrument panel, and the cockpit itself. Choose how you want to display your Type 6 Shuttlecraft with four types of hull: a clean version or variants featuring Goddard, Justman, or Magelan lettering. This versatile Star Trek STL files set is a perfect addition for fans of Star Trek TNG 3D models and sci-fi 3D prints.
ADAPTATION FOR 3D PRINTING
Type-6 Shuttlecraft 3D printing design is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 84 hours in total.
For you to receive the cleanest 3D printing result possible, minimize the amount of filament needed for generated support, and make use of the active elements designed by Gambody Engineers, the vehicle was divided into convenient assembly parts.
All assembly parts in the 1.0 FFF/FDM version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won’t face difficulties when placing the parts on a build plate. When downloading any model’s file you will also receive “Assembly Manual” for 1.0 FFF/FDM and 1.0 DLP/SLA versions in PDF and video formats. We highly recommend that you get acquainted with the "Assembly Video" and “Assembly Manual” before getting down to the Type-6 Shuttlecraft.
The design is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.
The 3D model’s scale was calculated from the length of the Type-6 Shuttlecraft. The 3D printer design’s chosen scales are 1:16 for the FFF/FDM version and 1:32 for the DLP/SLA version.
VERSIONS’ SPECIFICATIONS
1.0 FFF/FDM version features:
- Contains 67 parts;
- A printed version is 194 mm tall, 283 mm wide, 397 mm deep;
- A printed version on a platform is 298 mm tall, 283 mm wide, 397 mm deep;
- Four options for the upper hull: Goddard, Justman, Magelan, or clean version;
- Two lower-hull options: with or without lettering;
- Two rear-hull options: with or without lettering;
- Two versions of the hatch: with lettering and clean;
- Tunnels for LED wiring to light up the engines, cockpit instrument panel and the cockpit itself;
- All parts are divided in such a way that you will print them with the smallest number of support structures.
1.0 DLP/SLA version features:
- Contains 56 parts;
- A printed version is 97 mm tall, 142 mm wide, 198 mm deep;
- A printed version on a platform is 149 mm tall, 142 mm wide, 198 mm deep;
- Four options for the upper hull: Goddard, Justman, Magelan, or clean version;
- Two lower-hull options: with or without lettering;
- Two rear-hull options: with or without lettering;
- Two versions of the hatch: with lettering and clean;
- Tunnels for LED wiring to light up the engines, cockpit instrument panel and the cockpit itself;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.
You can get the STL files of Type-6 Shuttlecraft for 3D printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.
Watch the tutorial on how to assemble the 3D printed Type-6 Shuttlecraft model from the provided 3D print files on Gambody YouTube channel.
Also, you may like other Shuttle3D Printing Designs.
________
FAQ:
Average customer rating (5 reviews)
5
Ratings breakdown
Click a star rating to filter reviews
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Verified purchase 
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Verified purchase Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
This feedback is from a user who hasn't purchased this model Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Community Support Team 
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Community Support Team To avoid printing issues and achieve the best quality, we highly recommend applying the following settings:
Generic
Below you can find printing recommendations for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer software.
Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.
Note:
You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
All connectors should be printed at 100% Infill.
Bambu Lab printing recommendations:
These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.
To avoid printing problems, we recommend the following settings:download
Cura printing recommendations:
These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.
To avoid printing problems, we recommend the following settings:download
Simplify3D printing recommendations:
These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.
To avoid printing problems, we recommend the following settings:download
Slic3r printing recommendations:
These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.
To avoid printing problems, we recommend the following settings:download
PrusaSlicer printing recommendations:
These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.
To avoid printing problems, we recommend the following settings:download
