Community (fb) 
es 
ua 
Specifications
Source Files
Description
Update History
Printing Details
Feedback (19)
Comments
Specifications
Source Files
Description
Update History
Printing Details
Feedback (19)
Comments
Chevrolet Impala 1967 3D Printing Model | Assembly + Action
Specifications
Files
3D model format
Stereolithography (.stl)
Total files
516 
The total number of 3D model files available across all versions and updates of this model, including variants optimized for different types of 3D printers.
Slicer settings
Mesh error check
Netfabb
Support
Lifetime support from Gambody team
Update requests
Available to verified buyers
Model complexity
Expert
Expert: demanding print setup with intricate parts. Requires post-processing skills, attention to detail, and patience.
Model versions
1.1 Minor modification
FFF/FDM
Assembly method
not specified
Features
not specified
1.0 Initial
FFF/FDM
Assembly method
not specified
Features
not specified
Additional details
Part of diorama
No
Special pack included
No
You will get instant access to the STL files of Chevrolet Impala 1967 3D Printing Model | Assembly + Action after completing your purchase. Simply add the model to your cart and check out using PayPal, credit or debit card, Apple Pay, Google Pay, Alipay, or other available payment methods.
Watch the assembly video for Chevrolet Impala 1967 3D Printing Model | Assembly + Action, and explore more tutorials, behind-the-scenes content, 3D printing timelapses, and painting guides on the official Gambody YouTube channel.
Source Files
This 3D Model consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.
Before printing the files, we strongly recommend reading the PRINTING DETAILS section.
WHAT WILL YOU GET AFTER PURCHASE?
- 2 version of Chevrolet Impala 1967 STL files for FFF/FDM - STL files are available for download immediately after the purchase
- STL files of high-poly Chevrolet Impala 1967 3D Model for 3D printing consist of 507 parts
- Size: FFF/FDM: 180 mm tall, 257 mm wide, 677 mm deep
- Assembly Manual in PDF format and Assembly Video for FFF/FDM 1.0 version;
- Detailed settings that we provide as a recommendation for Cura, Simplify3D and Slic3r for the best print
- Full technical support from the Gambody Support Team
Detailed information about this 3D printing model is available in the DESCRIPTION section.
Important
Before printing, take a look at Printing Details for recommended settings and tips to achieve better results.
--Select printer type--
View update history
--Select model version--
| File name | Size (mm | in) | Size(mb) | Printing Time / Filament | |||
|---|---|---|---|---|---|---|
 | _1_frame_pin_1_R (repaired).stl 6.7 x 13.98 x 5.16 mm | 0.26 x 0.55 x 0.2 in | Size: 6.7 x 13.98 x 5.16 mm | 0.26 x 0.55 x 0.2 in | File size: 0.13 mb | Printing Time / Filament: 6 min / <1 m | ||
 | _2_frame_pin_2_R (repaired).stl 7.79 x 25.21 x 6 mm | 0.31 x 0.99 x 0.24 in | Size: 7.79 x 25.21 x 6 mm | 0.31 x 0.99 x 0.24 in | File size: 0.14 mb | Printing Time / Filament: 10 min / <1 m | ||
 | _3_frame_pin_3_R (repaired).stl 7.79 x 25.21 x 6 mm | 0.31 x 0.99 x 0.24 in | Size: 7.79 x 25.21 x 6 mm | 0.31 x 0.99 x 0.24 in | File size: 0.14 mb | Printing Time / Filament: 10 min / <1 m | ||
 | _4_frame_pin_4_R (repaired).stl 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | Size: 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | File size: 0.22 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _5_frame_pin_5_R (repaired).stl 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | Size: 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | File size: 0.22 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _6_frame_pin_6_R (repaired).stl 6 x 14.31 x 4 mm | 0.24 x 0.56 x 0.16 in | Size: 6 x 14.31 x 4 mm | 0.24 x 0.56 x 0.16 in | File size: 0.23 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _7_frame_pin_7_R (repaired).stl 6 x 14.31 x 4 mm | 0.24 x 0.56 x 0.16 in | Size: 6 x 14.31 x 4 mm | 0.24 x 0.56 x 0.16 in | File size: 0.23 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _8_frame_pin_8_R (repaired).stl 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | Size: 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | File size: 0.22 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _9_frame_pin_9_x10 (repaired).stl 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | Size: 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | File size: 0.22 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _10_frame_pin_10_R (repaired).stl 6 x 27.32 x 3.5 mm | 0.24 x 1.08 x 0.14 in | Size: 6 x 27.32 x 3.5 mm | 0.24 x 1.08 x 0.14 in | File size: 0.21 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _11_frame_pin_11_R (repaired).stl 6 x 27.22 x 3.5 mm | 0.24 x 1.07 x 0.14 in | Size: 6 x 27.22 x 3.5 mm | 0.24 x 1.07 x 0.14 in | File size: 0.21 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _12_frame_pin_12_R (repaired).stl 6 x 18.48 x 3.5 mm | 0.24 x 0.73 x 0.14 in | Size: 6 x 18.48 x 3.5 mm | 0.24 x 0.73 x 0.14 in | File size: 0.22 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _13_frame_pin_13_R_x2 (repaired).stl 6.74 x 22.57 x 3.93 mm | 0.27 x 0.89 x 0.15 in | Size: 6.74 x 22.57 x 3.93 mm | 0.27 x 0.89 x 0.15 in | File size: 0.22 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _14_frame_pin_1_L (repaired).stl 6.7 x 13.98 x 5.16 mm | 0.26 x 0.55 x 0.2 in | Size: 6.7 x 13.98 x 5.16 mm | 0.26 x 0.55 x 0.2 in | File size: 0.13 mb | Printing Time / Filament: 6 min / <1 m | ||
 | _15_frame_pin_2_L (repaired).stl 7.79 x 25.21 x 6 mm | 0.31 x 0.99 x 0.24 in | Size: 7.79 x 25.21 x 6 mm | 0.31 x 0.99 x 0.24 in | File size: 0.14 mb | Printing Time / Filament: 10 min / <1 m | ||
 | _16_frame_pin_3_L (repaired).stl 7.79 x 25.21 x 6 mm | 0.31 x 0.99 x 0.24 in | Size: 7.79 x 25.21 x 6 mm | 0.31 x 0.99 x 0.24 in | File size: 0.14 mb | Printing Time / Filament: 10 min / <1 m | ||
 | _17_frame_pin_4_L (repaired).stl 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | Size: 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | File size: 0.22 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _18_frame_pin_5_L (repaired).stl 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | Size: 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | File size: 0.22 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _19_frame_pin_6_L (repaired).stl 6 x 14.31 x 4 mm | 0.24 x 0.56 x 0.16 in | Size: 6 x 14.31 x 4 mm | 0.24 x 0.56 x 0.16 in | File size: 0.23 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _20_frame_pin_7_L (repaired).stl 6 x 14.31 x 4 mm | 0.24 x 0.56 x 0.16 in | Size: 6 x 14.31 x 4 mm | 0.24 x 0.56 x 0.16 in | File size: 0.23 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _21_frame_pin_8_L (repaired).stl 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | Size: 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | File size: 0.22 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _22_frame_pin_9_L (repaired).stl 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | Size: 6 x 18.58 x 3.5 mm | 0.24 x 0.73 x 0.14 in | File size: 0.22 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _23_frame_pin_10_L (repaired).stl 6 x 27.32 x 3.5 mm | 0.24 x 1.08 x 0.14 in | Size: 6 x 27.32 x 3.5 mm | 0.24 x 1.08 x 0.14 in | File size: 0.21 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _24_frame_pin_11_L (repaired).stl 6 x 27.22 x 3.5 mm | 0.24 x 1.07 x 0.14 in | Size: 6 x 27.22 x 3.5 mm | 0.24 x 1.07 x 0.14 in | File size: 0.21 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _25_frame_pin_12_L (repaired).stl 6 x 18.48 x 3.5 mm | 0.24 x 0.73 x 0.14 in | Size: 6 x 18.48 x 3.5 mm | 0.24 x 0.73 x 0.14 in | File size: 0.22 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _26_frame_front (repaired).stl 180.9 x 36.45 x 225.14 mm | 7.12 x 1.44 x 8.86 in | Size: 180.9 x 36.45 x 225.14 mm | 7.12 x 1.44 x 8.86 in | File size: 5.61 mb | Printing Time / Filament: 36 h 28 min / 26 m | ||
 | _27_frame_beam (repaired).stl 158.66 x 10.33 x 19.77 mm | 6.25 x 0.41 x 0.78 in | Size: 158.66 x 10.33 x 19.77 mm | 6.25 x 0.41 x 0.78 in | File size: 0.26 mb | Printing Time / Filament: 2 h 33 min / 1 m | ||
 | _28_frame_R (repaired).stl 14 x 12 x 155.29 mm | 0.55 x 0.47 x 6.11 in | Size: 14 x 12 x 155.29 mm | 0.55 x 0.47 x 6.11 in | File size: 0.43 mb | Printing Time / Filament: 3 h 32 min / 2 m | ||
 | _29_frame_L (repaired).stl 14 x 12 x 155.29 mm | 0.55 x 0.47 x 6.11 in | Size: 14 x 12 x 155.29 mm | 0.55 x 0.47 x 6.11 in | File size: 0.43 mb | Printing Time / Filament: 3 h 32 min / 2 m | ||
 | _30_frame_back_a (repaired).stl 188.59 x 48.75 x 194.69 mm | 7.42 x 1.92 x 7.66 in | Size: 188.59 x 48.75 x 194.69 mm | 7.42 x 1.92 x 7.66 in | File size: 3.80 mb | Printing Time / Filament: 27 h 40 min / 18 m | ||
 | _31_frame_back_b (repaired).stl 137.18 x 15.68 x 92.01 mm | 5.4 x 0.62 x 3.62 in | Size: 137.18 x 15.68 x 92.01 mm | 5.4 x 0.62 x 3.62 in | File size: 1.40 mb | Printing Time / Filament: 11 h 5 min / 9 m | ||
 | _32_wheel_tire_front_R (repaired).stl 85.09 x 85.09 x 25.52 mm | 3.35 x 3.35 x 1 in | Size: 85.09 x 85.09 x 25.52 mm | 3.35 x 3.35 x 1 in | File size: 19.41 mb | Printing Time / Filament: 9 h 29 min / 5 m | ||
 | _33_wheel_disk_front_R (repaired).stl 48.16 x 48.16 x 16.89 mm | 1.9 x 1.9 x 0.66 in | Size: 48.16 x 48.16 x 16.89 mm | 1.9 x 1.9 x 0.66 in | File size: 6.17 mb | Printing Time / Filament: 2 h 57 min / 2 m | ||
 | _34_wheel_brake_front_R (repaired).stl 36.58 x 35 x 5.3 mm | 1.44 x 1.38 x 0.21 in | Size: 36.58 x 35 x 5.3 mm | 1.44 x 1.38 x 0.21 in | File size: 0.78 mb | Printing Time / Filament: 43 min / <1 m | ||
 | _35_wheel_connector_front_R (repaired).stl 28.4 x 8 x 6 mm | 1.12 x 0.31 x 0.24 in | Size: 28.4 x 8 x 6 mm | 1.12 x 0.31 x 0.24 in | File size: 0.07 mb | Printing Time / Filament: 11 min / <1 m | ||
 | _36_wheel_tire_back_R (repaired).stl 85.09 x 85.09 x 28.53 mm | 3.35 x 3.35 x 1.12 in | Size: 85.09 x 85.09 x 28.53 mm | 3.35 x 3.35 x 1.12 in | File size: 19.55 mb | Printing Time / Filament: 10 h 51 min / 6 m | ||
 | _37_wheel_disk_back_R (repaired).stl 48.16 x 48.16 x 21.89 mm | 1.9 x 1.9 x 0.86 in | Size: 48.16 x 48.16 x 21.89 mm | 1.9 x 1.9 x 0.86 in | File size: 6.17 mb | Printing Time / Filament: 3 h 29 min / 2 m | ||
 | _38_wheel_brake_back_R (repaired).stl 36.58 x 35 x 5.3 mm | 1.44 x 1.38 x 0.21 in | Size: 36.58 x 35 x 5.3 mm | 1.44 x 1.38 x 0.21 in | File size: 0.78 mb | Printing Time / Filament: 43 min / <1 m | ||
 | _39_wheel_tire_front_L (repaired).stl 85.09 x 85.09 x 25.52 mm | 3.35 x 3.35 x 1 in | Size: 85.09 x 85.09 x 25.52 mm | 3.35 x 3.35 x 1 in | File size: 19.41 mb | Printing Time / Filament: 9 h 41 min / 5 m | ||
 | _40_wheel_disk_front_L (repaired).stl 48.16 x 48.16 x 16.89 mm | 1.9 x 1.9 x 0.66 in | Size: 48.16 x 48.16 x 16.89 mm | 1.9 x 1.9 x 0.66 in | File size: 6.17 mb | Printing Time / Filament: 2 h 58 min / 2 m | ||
 | _41_wheel_brake_front_L (repaired).stl 36.58 x 35 x 5.3 mm | 1.44 x 1.38 x 0.21 in | Size: 36.58 x 35 x 5.3 mm | 1.44 x 1.38 x 0.21 in | File size: 0.78 mb | Printing Time / Filament: 43 min / <1 m | ||
 | _42_wheel_connector_front_L (repaired).stl 28.4 x 8 x 6 mm | 1.12 x 0.31 x 0.24 in | Size: 28.4 x 8 x 6 mm | 1.12 x 0.31 x 0.24 in | File size: 0.07 mb | Printing Time / Filament: 11 min / <1 m | ||
 | _43_wheel_tire_back_L (repaired).stl 85.09 x 85.09 x 28.53 mm | 3.35 x 3.35 x 1.12 in | Size: 85.09 x 85.09 x 28.53 mm | 3.35 x 3.35 x 1.12 in | File size: 19.55 mb | Printing Time / Filament: 10 h 54 min / 6 m | ||
 | _44_wheel_disk_back_L (repaired).stl 48.16 x 48.16 x 21.89 mm | 1.9 x 1.9 x 0.86 in | Size: 48.16 x 48.16 x 21.89 mm | 1.9 x 1.9 x 0.86 in | File size: 6.17 mb | Printing Time / Filament: 3 h 28 min / 2 m | ||
 | _45_wheel_brake_back_L (repaired).stl 36.58 x 35 x 5.3 mm | 1.44 x 1.38 x 0.21 in | Size: 36.58 x 35 x 5.3 mm | 1.44 x 1.38 x 0.21 in | File size: 0.78 mb | Printing Time / Filament: 44 min / <1 m | ||
 | _46_frame_front_suspension_pin_1_R (repaired).stl 5 x 21 x 3 mm | 0.2 x 0.83 x 0.12 in | Size: 5 x 21 x 3 mm | 0.2 x 0.83 x 0.12 in | File size: 0.21 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _47_frame_front_suspension_pin_2_R (repaired).stl 7.79 x 30.6 x 6 mm | 0.31 x 1.2 x 0.24 in | Size: 7.79 x 30.6 x 6 mm | 0.31 x 1.2 x 0.24 in | File size: 0.13 mb | Printing Time / Filament: 12 min / <1 m | ||
 | _48_frame_front_suspension_pin_3_R (repaired).stl 5 x 15.2 x 2.9 mm | 0.2 x 0.6 x 0.11 in | Size: 5 x 15.2 x 2.9 mm | 0.2 x 0.6 x 0.11 in | File size: 0.21 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _49_frame_front_suspension_pin_4_R (repaired).stl 36.1 x 5 x 3 mm | 1.42 x 0.2 x 0.12 in | Size: 36.1 x 5 x 3 mm | 1.42 x 0.2 x 0.12 in | File size: 0.25 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _50_frame_front_suspension_pin_5_R (repaired).stl 36.1 x 5 x 3 mm | 1.42 x 0.2 x 0.12 in | Size: 36.1 x 5 x 3 mm | 1.42 x 0.2 x 0.12 in | File size: 0.25 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _51_frame_front_suspension_pin_6_R (repaired).stl 36.7 x 7.6 x 6 mm | 1.44 x 0.3 x 0.24 in | Size: 36.7 x 7.6 x 6 mm | 1.44 x 0.3 x 0.24 in | File size: 0.24 mb | Printing Time / Filament: 13 min / <1 m | ||
 | _52_frame_front_suspension_pin_7_R (repaired).stl 5 x 10.5 x 3 mm | 0.2 x 0.41 x 0.12 in | Size: 5 x 10.5 x 3 mm | 0.2 x 0.41 x 0.12 in | File size: 0.18 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _53_frame_front_suspension_1_R (repaired).stl 30.21 x 25.93 x 18 mm | 1.19 x 1.02 x 0.71 in | Size: 30.21 x 25.93 x 18 mm | 1.19 x 1.02 x 0.71 in | File size: 0.22 mb | Printing Time / Filament: 52 min / 1 m | ||
 | _54_frame_front_suspension_2_R (repaired).stl 27.8 x 56.4 x 24.06 mm | 1.09 x 2.22 x 0.95 in | Size: 27.8 x 56.4 x 24.06 mm | 1.09 x 2.22 x 0.95 in | File size: 2.79 mb | Printing Time / Filament: 2 h 8 min / 1 m | ||
 | _55_frame_front_suspension_3_R (repaired).stl 56.4 x 18.18 x 36.2 mm | 2.22 x 0.72 x 1.43 in | Size: 56.4 x 18.18 x 36.2 mm | 2.22 x 0.72 x 1.43 in | File size: 2.62 mb | Printing Time / Filament: 1 h 29 min / 1 m | ||
 | _56_frame_front_suspension_4_R (repaired).stl 40 x 46.31 x 23.95 mm | 1.57 x 1.82 x 0.94 in | Size: 40 x 46.31 x 23.95 mm | 1.57 x 1.82 x 0.94 in | File size: 0.96 mb | Printing Time / Filament: 1 h 10 min / 1 m | ||
 | _57_frame_front_suspension_5_R (repaired).stl 10.6 x 10.6 x 25.5 mm | 0.42 x 0.42 x 1 in | Size: 10.6 x 10.6 x 25.5 mm | 0.42 x 0.42 x 1 in | File size: 0.87 mb | Printing Time / Filament: 27 min / <1 m | ||
 | _58_frame_front_suspension_6_R (repaired).stl 10.6 x 10.6 x 27.4 mm | 0.42 x 0.42 x 1.08 in | Size: 10.6 x 10.6 x 27.4 mm | 0.42 x 0.42 x 1.08 in | File size: 0.61 mb | Printing Time / Filament: 31 min / <1 m | ||
 | _59_frame_front_suspension_pin_1_L (repaired).stl 5 x 21 x 3 mm | 0.2 x 0.83 x 0.12 in | Size: 5 x 21 x 3 mm | 0.2 x 0.83 x 0.12 in | File size: 0.21 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _60_frame_front_suspension_pin_2_L (repaired).stl 7.79 x 30.6 x 6 mm | 0.31 x 1.2 x 0.24 in | Size: 7.79 x 30.6 x 6 mm | 0.31 x 1.2 x 0.24 in | File size: 0.13 mb | Printing Time / Filament: 12 min / <1 m | ||
 | _61_frame_front_suspension_pin_3_L (repaired).stl 5 x 15.2 x 2.9 mm | 0.2 x 0.6 x 0.11 in | Size: 5 x 15.2 x 2.9 mm | 0.2 x 0.6 x 0.11 in | File size: 0.21 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _62_frame_front_suspension_pin_4_L (repaired).stl 36.1 x 5 x 3 mm | 1.42 x 0.2 x 0.12 in | Size: 36.1 x 5 x 3 mm | 1.42 x 0.2 x 0.12 in | File size: 0.25 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _63_frame_front_suspension_pin_5_L (repaired).stl 36.1 x 5 x 3 mm | 1.42 x 0.2 x 0.12 in | Size: 36.1 x 5 x 3 mm | 1.42 x 0.2 x 0.12 in | File size: 0.25 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _64_frame_front_suspension_pin_6_L (repaired).stl 36.7 x 7.6 x 6 mm | 1.44 x 0.3 x 0.24 in | Size: 36.7 x 7.6 x 6 mm | 1.44 x 0.3 x 0.24 in | File size: 0.24 mb | Printing Time / Filament: 13 min / <1 m | ||
 | _65_frame_front_suspension_pin_7_L (repaired).stl 5 x 10.5 x 3 mm | 0.2 x 0.41 x 0.12 in | Size: 5 x 10.5 x 3 mm | 0.2 x 0.41 x 0.12 in | File size: 0.18 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _66_frame_front_suspension_1_L (repaired).stl 30.21 x 25.93 x 18 mm | 1.19 x 1.02 x 0.71 in | Size: 30.21 x 25.93 x 18 mm | 1.19 x 1.02 x 0.71 in | File size: 0.22 mb | Printing Time / Filament: 52 min / 1 m | ||
 | _67_frame_front_suspension_2_L (repaired).stl 27.8 x 56.4 x 24.06 mm | 1.09 x 2.22 x 0.95 in | Size: 27.8 x 56.4 x 24.06 mm | 1.09 x 2.22 x 0.95 in | File size: 2.79 mb | Printing Time / Filament: 2 h 8 min / 1 m | ||
 | _68_frame_front_suspension_3_L (repaired).stl 56.4 x 18.18 x 36.2 mm | 2.22 x 0.72 x 1.43 in | Size: 56.4 x 18.18 x 36.2 mm | 2.22 x 0.72 x 1.43 in | File size: 2.62 mb | Printing Time / Filament: 1 h 29 min / 1 m | ||
 | _69_frame_front_suspension_4_L (repaired).stl 40 x 46.31 x 23.95 mm | 1.57 x 1.82 x 0.94 in | Size: 40 x 46.31 x 23.95 mm | 1.57 x 1.82 x 0.94 in | File size: 0.96 mb | Printing Time / Filament: 1 h 10 min / 1 m | ||
 | _70_frame_front_suspension_5_L (repaired).stl 10.6 x 10.6 x 25.5 mm | 0.42 x 0.42 x 1 in | Size: 10.6 x 10.6 x 25.5 mm | 0.42 x 0.42 x 1 in | File size: 0.87 mb | Printing Time / Filament: 27 min / <1 m | ||
 | _71_frame_front_suspension_6_L (repaired).stl 10.6 x 10.6 x 27.4 mm | 0.42 x 0.42 x 1.08 in | Size: 10.6 x 10.6 x 27.4 mm | 0.42 x 0.42 x 1.08 in | File size: 0.61 mb | Printing Time / Filament: 32 min / <1 m | ||
 | _72_frame_back_suspension_pin_1_R (repaired).stl 13.8 x 16.6 x 6.8 mm | 0.54 x 0.65 x 0.27 in | Size: 13.8 x 16.6 x 6.8 mm | 0.54 x 0.65 x 0.27 in | File size: 0.12 mb | Printing Time / Filament: 8 min / <1 m | ||
 | _73_frame_back_suspension_pin_2_R (repaired).stl 13.8 x 16.6 x 6.8 mm | 0.54 x 0.65 x 0.27 in | Size: 13.8 x 16.6 x 6.8 mm | 0.54 x 0.65 x 0.27 in | File size: 0.12 mb | Printing Time / Filament: 8 min / <1 m | ||
 | _74_frame_back_suspension_pin_3_R (repaired).stl 4.97 x 9.6 x 3.32 mm | 0.2 x 0.38 x 0.13 in | Size: 4.97 x 9.6 x 3.32 mm | 0.2 x 0.38 x 0.13 in | File size: 0.18 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _75_frame_back_suspension_pin_4_R (repaired).stl 4.97 x 9.6 x 3.32 mm | 0.2 x 0.38 x 0.13 in | Size: 4.97 x 9.6 x 3.32 mm | 0.2 x 0.38 x 0.13 in | File size: 0.18 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _76_frame_back_suspension_pin_5_R (repaired).stl 20.4 x 5 x 3 mm | 0.8 x 0.2 x 0.12 in | Size: 20.4 x 5 x 3 mm | 0.8 x 0.2 x 0.12 in | File size: 0.22 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _77_frame_back_suspension_pin_6_R (repaired).stl 23.1 x 8 x 4 mm | 0.91 x 0.31 x 0.16 in | Size: 23.1 x 8 x 4 mm | 0.91 x 0.31 x 0.16 in | File size: 0.18 mb | Printing Time / Filament: 6 min / <1 m | ||
 | _78_frame_back_suspension_1_L (repaired).stl 78.36 x 20.21 x 6 mm | 3.09 x 0.8 x 0.24 in | Size: 78.36 x 20.21 x 6 mm | 3.09 x 0.8 x 0.24 in | File size: 0.10 mb | Printing Time / Filament: 30 min / <1 m | ||
 | _79_frame_back_suspension_2_L (repaired).stl 24 x 20 x 10 mm | 0.94 x 0.79 x 0.39 in | Size: 24 x 20 x 10 mm | 0.94 x 0.79 x 0.39 in | File size: 0.07 mb | Printing Time / Filament: 22 min / <1 m | ||
 | _80_frame_back_suspension_3_L (repaired).stl 10.6 x 10.6 x 27.4 mm | 0.42 x 0.42 x 1.08 in | Size: 10.6 x 10.6 x 27.4 mm | 0.42 x 0.42 x 1.08 in | File size: 0.61 mb | Printing Time / Filament: 31 min / <1 m | ||
 | _81_frame_back_suspension_4_L (repaired).stl 10.6 x 10.6 x 25.5 mm | 0.42 x 0.42 x 1 in | Size: 10.6 x 10.6 x 25.5 mm | 0.42 x 0.42 x 1 in | File size: 0.87 mb | Printing Time / Filament: 27 min / <1 m | ||
 | _82_frame_back_suspension_pin_1_L (repaired).stl 13.8 x 16.6 x 6.8 mm | 0.54 x 0.65 x 0.27 in | Size: 13.8 x 16.6 x 6.8 mm | 0.54 x 0.65 x 0.27 in | File size: 0.12 mb | Printing Time / Filament: 8 min / <1 m | ||
 | _83_frame_back_suspension_pin_2_L (repaired).stl 13.8 x 16.6 x 6.8 mm | 0.54 x 0.65 x 0.27 in | Size: 13.8 x 16.6 x 6.8 mm | 0.54 x 0.65 x 0.27 in | File size: 0.12 mb | Printing Time / Filament: 8 min / <1 m | ||
 | _84_frame_back_suspension_pin_3_L (repaired).stl 4.97 x 9.6 x 3.32 mm | 0.2 x 0.38 x 0.13 in | Size: 4.97 x 9.6 x 3.32 mm | 0.2 x 0.38 x 0.13 in | File size: 0.18 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _85_frame_back_suspension_pin_4_L (repaired).stl 4.97 x 9.6 x 3.32 mm | 0.2 x 0.38 x 0.13 in | Size: 4.97 x 9.6 x 3.32 mm | 0.2 x 0.38 x 0.13 in | File size: 0.18 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _86_frame_back_suspension_pin_5_L (repaired).stl 20.4 x 5 x 3 mm | 0.8 x 0.2 x 0.12 in | Size: 20.4 x 5 x 3 mm | 0.8 x 0.2 x 0.12 in | File size: 0.22 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _87_frame_back_suspension_pin_6_L (repaired).stl 23.1 x 8 x 4 mm | 0.91 x 0.31 x 0.16 in | Size: 23.1 x 8 x 4 mm | 0.91 x 0.31 x 0.16 in | File size: 0.18 mb | Printing Time / Filament: 6 min / <1 m | ||
 | _88_frame_back_suspension_1_L (repaired).stl 78.36 x 20.21 x 6 mm | 3.09 x 0.8 x 0.24 in | Size: 78.36 x 20.21 x 6 mm | 3.09 x 0.8 x 0.24 in | File size: 0.10 mb | Printing Time / Filament: 30 min / <1 m | ||
 | _89_frame_back_suspension_2_L (repaired).stl 24 x 20 x 10 mm | 0.94 x 0.79 x 0.39 in | Size: 24 x 20 x 10 mm | 0.94 x 0.79 x 0.39 in | File size: 0.07 mb | Printing Time / Filament: 22 min / <1 m | ||
 | _90_frame_back_suspension_3_L (repaired).stl 10.6 x 10.6 x 27.4 mm | 0.42 x 0.42 x 1.08 in | Size: 10.6 x 10.6 x 27.4 mm | 0.42 x 0.42 x 1.08 in | File size: 0.61 mb | Printing Time / Filament: 32 min / <1 m | ||
 | _91_frame_back_suspension_4_L (repaired).stl 10.6 x 10.6 x 25.5 mm | 0.42 x 0.42 x 1 in | Size: 10.6 x 10.6 x 25.5 mm | 0.42 x 0.42 x 1 in | File size: 0.87 mb | Printing Time / Filament: 27 min / <1 m | ||
 | _92_frame_center_suspension_pin_1 (repaired).stl 5 x 13 x 3 mm | 0.2 x 0.51 x 0.12 in | Size: 5 x 13 x 3 mm | 0.2 x 0.51 x 0.12 in | File size: 0.19 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _93_frame_center_suspension_pin_2 (repaired).stl 5 x 13 x 3 mm | 0.2 x 0.51 x 0.12 in | Size: 5 x 13 x 3 mm | 0.2 x 0.51 x 0.12 in | File size: 0.19 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _94_frame_center_suspension_pin_3_x6 (repaired).stl 3.55 x 4 x 5.65 mm | 0.14 x 0.16 x 0.22 in | Size: 3.55 x 4 x 5.65 mm | 0.14 x 0.16 x 0.22 in | File size: 0.10 mb | Printing Time / Filament: 2 min / <1 m | ||
 | _95_frame_center_suspension_pin_4 (repaired).stl 4 x 4 x 12 mm | 0.16 x 0.16 x 0.47 in | Size: 4 x 4 x 12 mm | 0.16 x 0.16 x 0.47 in | File size: 0.04 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _96_frame_center_suspension_pin_5 (repaired).stl 4 x 4 x 12.1 mm | 0.16 x 0.16 x 0.48 in | Size: 4 x 4 x 12.1 mm | 0.16 x 0.16 x 0.48 in | File size: 0.04 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _97_frame_center_suspension_pin_6 (repaired).stl 4 x 4 x 12.1 mm | 0.16 x 0.16 x 0.48 in | Size: 4 x 4 x 12.1 mm | 0.16 x 0.16 x 0.48 in | File size: 0.04 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _98_frame_center_suspension_1 (repaired).stl 205.8 x 7 x 6 mm | 8.1 x 0.28 x 0.24 in | Size: 205.8 x 7 x 6 mm | 8.1 x 0.28 x 0.24 in | File size: 0.18 mb | Printing Time / Filament: 1 h 8 min / 1 m | ||
 Updated | _99_frame_center_suspension_2 (repaired).stl 177.8 x 32 x 38.61 mm | 7 x 1.26 x 1.52 in | Size: 177.8 x 32 x 38.61 mm | 7 x 1.26 x 1.52 in | File size: 1.77 mb | Printing Time / Filament: 9 h 23 min / 6 m | ||
 | _100_frame_center_suspension_3 (repaired).stl 14.83 x 14.89 x 6.09 mm | 0.58 x 0.59 x 0.24 in | Size: 14.83 x 14.89 x 6.09 mm | 0.58 x 0.59 x 0.24 in | File size: 0.31 mb | Printing Time / Filament: 11 min / <1 m | ||
 | _101_frame_center_suspension_4 (repaired).stl 20.13 x 20.12 x 41.17 mm | 0.79 x 0.79 x 1.62 in | Size: 20.13 x 20.12 x 41.17 mm | 0.79 x 0.79 x 1.62 in | File size: 0.63 mb | Printing Time / Filament: 1 h / <1 m | ||
 | _102_frame_center_suspension_5 (repaired).stl 31.99 x 31.99 x 6.04 mm | 1.26 x 1.26 x 0.24 in | Size: 31.99 x 31.99 x 6.04 mm | 1.26 x 1.26 x 0.24 in | File size: 0.18 mb | Printing Time / Filament: 29 min / <1 m | ||
 | _103_frame_center_suspension_6 (repaired).stl 18.3 x 18.3 x 2 mm | 0.72 x 0.72 x 0.08 in | Size: 18.3 x 18.3 x 2 mm | 0.72 x 0.72 x 0.08 in | File size: 0.12 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _104_frame_center_suspension_7 (repaired).stl 11.31 x 26 x 11.31 mm | 0.45 x 1.02 x 0.45 in | Size: 11.31 x 26 x 11.31 mm | 0.45 x 1.02 x 0.45 in | File size: 0.07 mb | Printing Time / Filament: 18 min / <1 m | ||
 | _105_frame_center_suspension_8 (repaired).stl 12 x 12.01 x 228.33 mm | 0.47 x 0.47 x 8.99 in | Size: 12 x 12.01 x 228.33 mm | 0.47 x 0.47 x 8.99 in | File size: 0.39 mb | Printing Time / Filament: 3 h 33 min / 2 m | ||
 | _106_frame_center_suspension_9 (repaired).stl 11.31 x 11.31 x 46.37 mm | 0.45 x 0.45 x 1.83 in | Size: 11.31 x 11.31 x 46.37 mm | 0.45 x 0.45 x 1.83 in | File size: 0.19 mb | Printing Time / Filament: 44 min / <1 m | ||
 | _107_frame_center_suspension_10 (repaired).stl 86.52 x 33.18 x 2.8 mm | 3.41 x 1.31 x 0.11 in | Size: 86.52 x 33.18 x 2.8 mm | 3.41 x 1.31 x 0.11 in | File size: 0.44 mb | Printing Time / Filament: 15 min / <1 m | ||
 | _108_frame_stearing_pin_1 (repaired).stl 5 x 14.2 x 3.4 mm | 0.2 x 0.56 x 0.13 in | Size: 5 x 14.2 x 3.4 mm | 0.2 x 0.56 x 0.13 in | File size: 0.24 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _109_frame_stearing_pin_2 (repaired).stl 5 x 14.2 x 3.4 mm | 0.2 x 0.56 x 0.13 in | Size: 5 x 14.2 x 3.4 mm | 0.2 x 0.56 x 0.13 in | File size: 0.24 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _110_frame_stearing_beam_a (repaired).stl 96 x 27.97 x 18.8 mm | 3.78 x 1.1 x 0.74 in | Size: 96 x 27.97 x 18.8 mm | 3.78 x 1.1 x 0.74 in | File size: 0.49 mb | Printing Time / Filament: 2 h 10 min / 1 m | ||
 | _111_frame_stearing_beam_b (repaired).stl 152.91 x 6 x 5.5 mm | 6.02 x 0.24 x 0.22 in | Size: 152.91 x 6 x 5.5 mm | 6.02 x 0.24 x 0.22 in | File size: 0.81 mb | Printing Time / Filament: 43 min / <1 m | ||
 | _112_frame_stearing_1 (repaired).stl 14 x 14 x 4.1 mm | 0.55 x 0.55 x 0.16 in | Size: 14 x 14 x 4.1 mm | 0.55 x 0.55 x 0.16 in | File size: 0.17 mb | Printing Time / Filament: 7 min / <1 m | ||
 | _113_frame_stearing_2 (repaired).stl 9.6 x 9.27 x 5.8 mm | 0.38 x 0.36 x 0.23 in | Size: 9.6 x 9.27 x 5.8 mm | 0.38 x 0.36 x 0.23 in | File size: 0.19 mb | Printing Time / Filament: 10 min / <1 m | ||
 | _114_frame_stearing_3 (repaired).stl 8.1 x 142.15 x 5.55 mm | 0.32 x 5.6 x 0.22 in | Size: 8.1 x 142.15 x 5.55 mm | 0.32 x 5.6 x 0.22 in | File size: 0.22 mb | Printing Time / Filament: 24 min / <1 m | ||
 | _115_frame_stearing_4 (repaired).stl 43.12 x 43.12 x 15.62 mm | 1.7 x 1.7 x 0.61 in | Size: 43.12 x 43.12 x 15.62 mm | 1.7 x 1.7 x 0.61 in | File size: 13.79 mb | Printing Time / Filament: 1 h 24 min / 1 m | ||
 | _116_body_pin_1_R (repaired).stl 3.85 x 49.28 x 2.96 mm | 0.15 x 1.94 x 0.12 in | Size: 3.85 x 49.28 x 2.96 mm | 0.15 x 1.94 x 0.12 in | File size: 0.19 mb | Printing Time / Filament: 7 min / <1 m | ||
 | _117_body_pin_2_R (repaired).stl 17.54 x 3.85 x 2.96 mm | 0.69 x 0.15 x 0.12 in | Size: 17.54 x 3.85 x 2.96 mm | 0.69 x 0.15 x 0.12 in | File size: 0.14 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _118_body_pin_3_R (repaired).stl 3.85 x 51.65 x 2.97 mm | 0.15 x 2.03 x 0.12 in | Size: 3.85 x 51.65 x 2.97 mm | 0.15 x 2.03 x 0.12 in | File size: 0.19 mb | Printing Time / Filament: 7 min / <1 m | ||
 | _119_body_pin_4_R (repaired).stl 17.54 x 3.85 x 2.96 mm | 0.69 x 0.15 x 0.12 in | Size: 17.54 x 3.85 x 2.96 mm | 0.69 x 0.15 x 0.12 in | File size: 0.14 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _120_body_pin_5_R (repaired).stl 41.83 x 9.28 x 9.28 mm | 1.65 x 0.37 x 0.37 in | Size: 41.83 x 9.28 x 9.28 mm | 1.65 x 0.37 x 0.37 in | File size: 0.01 mb | Printing Time / Filament: 25 min / <1 m | ||
 | _121_body_pin_6_R (repaired).stl 41.83 x 9.28 x 9.28 mm | 1.65 x 0.37 x 0.37 in | Size: 41.83 x 9.28 x 9.28 mm | 1.65 x 0.37 x 0.37 in | File size: 0.01 mb | Printing Time / Filament: 25 min / <1 m | ||
 | _122_body_pin_7_R (repaired).stl 28.42 x 9.28 x 9.28 mm | 1.12 x 0.37 x 0.37 in | Size: 28.42 x 9.28 x 9.28 mm | 1.12 x 0.37 x 0.37 in | File size: 0.01 mb | Printing Time / Filament: 17 min / <1 m | ||
 | _123_body_pin_1_L (repaired).stl 3.85 x 49.28 x 2.96 mm | 0.15 x 1.94 x 0.12 in | Size: 3.85 x 49.28 x 2.96 mm | 0.15 x 1.94 x 0.12 in | File size: 0.19 mb | Printing Time / Filament: 7 min / <1 m | ||
 | _124_body_pin_2_L (repaired).stl 17.54 x 3.85 x 2.96 mm | 0.69 x 0.15 x 0.12 in | Size: 17.54 x 3.85 x 2.96 mm | 0.69 x 0.15 x 0.12 in | File size: 0.14 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _125_body_pin_3_L (repaired).stl 3.85 x 51.65 x 2.97 mm | 0.15 x 2.03 x 0.12 in | Size: 3.85 x 51.65 x 2.97 mm | 0.15 x 2.03 x 0.12 in | File size: 0.19 mb | Printing Time / Filament: 7 min / <1 m | ||
 | _126_body_pin_4_L (repaired).stl 17.54 x 3.85 x 2.96 mm | 0.69 x 0.15 x 0.12 in | Size: 17.54 x 3.85 x 2.96 mm | 0.69 x 0.15 x 0.12 in | File size: 0.14 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _127_body_pin_5_L (repaired).stl 41.83 x 9.28 x 9.28 mm | 1.65 x 0.37 x 0.37 in | Size: 41.83 x 9.28 x 9.28 mm | 1.65 x 0.37 x 0.37 in | File size: 0.01 mb | Printing Time / Filament: 25 min / <1 m | ||
 | _128_body_pin_6_L (repaired).stl 41.83 x 9.28 x 9.28 mm | 1.65 x 0.37 x 0.37 in | Size: 41.83 x 9.28 x 9.28 mm | 1.65 x 0.37 x 0.37 in | File size: 0.01 mb | Printing Time / Filament: 25 min / <1 m | ||
 | _129_body_pin_7_L (repaired).stl 28.42 x 9.28 x 9.28 mm | 1.12 x 0.37 x 0.37 in | Size: 28.42 x 9.28 x 9.28 mm | 1.12 x 0.37 x 0.37 in | File size: 0.01 mb | Printing Time / Filament: 17 min / <1 m | ||
 | _130_body_pin_8 (repaired).stl 5.66 x 25.63 x 3.55 mm | 0.22 x 1.01 x 0.14 in | Size: 5.66 x 25.63 x 3.55 mm | 0.22 x 1.01 x 0.14 in | File size: 0.01 mb | Printing Time / Filament: 6 min / <1 m | ||
 | _131_body_pin_9 (repaired).stl 7.77 x 25.96 x 3.55 mm | 0.31 x 1.02 x 0.14 in | Size: 7.77 x 25.96 x 3.55 mm | 0.31 x 1.02 x 0.14 in | File size: 0.01 mb | Printing Time / Filament: 6 min / <1 m | ||
 | _132_body_pin_10 (repaired).stl 7.77 x 25.96 x 3.55 mm | 0.31 x 1.02 x 0.14 in | Size: 7.77 x 25.96 x 3.55 mm | 0.31 x 1.02 x 0.14 in | File size: 0.01 mb | Printing Time / Filament: 6 min / <1 m | ||
 | _133_body_wiper_R (repaired).stl 80.51 x 26.23 x 13 mm | 3.17 x 1.03 x 0.51 in | Size: 80.51 x 26.23 x 13 mm | 3.17 x 1.03 x 0.51 in | File size: 0.90 mb | Printing Time / Filament: 29 min / <1 m | ||
 | _134_body_wiper_L (repaired).stl 83.69 x 5.9 x 16.06 mm | 3.29 x 0.23 x 0.63 in | Size: 83.69 x 5.9 x 16.06 mm | 3.29 x 0.23 x 0.63 in | File size: 0.90 mb | Printing Time / Filament: 31 min / <1 m | ||
 | _135_body_window_front (repaired).stl 189.47 x 58.4 x 41.26 mm | 7.46 x 2.3 x 1.62 in | Size: 189.47 x 58.4 x 41.26 mm | 7.46 x 2.3 x 1.62 in | File size: 1.89 mb | Printing Time / Filament: 3 h 28 min / 2 m | ||
 | _136_body_window_back (repaired).stl 167.95 x 6.76 x 90.31 mm | 6.61 x 0.27 x 3.56 in | Size: 167.95 x 6.76 x 90.31 mm | 6.61 x 0.27 x 3.56 in | File size: 1.20 mb | Printing Time / Filament: 6 h 44 min / 4 m | ||
 | _137_body_top_1 (repaired).stl 201.94 x 81.28 x 105.51 mm | 7.95 x 3.2 x 4.15 in | Size: 201.94 x 81.28 x 105.51 mm | 7.95 x 3.2 x 4.15 in | File size: 11.62 mb | Printing Time / Filament: 26 h 36 min / 16 m | ||
 | _138_body_top_2 (repaired).stl 223.65 x 32.14 x 173.87 mm | 8.81 x 1.27 x 6.85 in | Size: 223.65 x 32.14 x 173.87 mm | 8.81 x 1.27 x 6.85 in | File size: 10.36 mb | Printing Time / Filament: 16 h 37 min / 9 m | ||
 | _139_body_front_R (repaired).stl 105.7 x 232.92 x 73.72 mm | 4.16 x 9.17 x 2.9 in | Size: 105.7 x 232.92 x 73.72 mm | 4.16 x 9.17 x 2.9 in | File size: 19.18 mb | Printing Time / Filament: 60 h 55 min / 45 m | ||
 | _140_body_front_cap_R (repaired).stl 3.49 x 3.49 x 6.41 mm | 0.14 x 0.14 x 0.25 in | Size: 3.49 x 3.49 x 6.41 mm | 0.14 x 0.14 x 0.25 in | File size: 0.10 mb | Printing Time / Filament: 2 min / <1 m | ||
 | _141_body_front_L (repaired).stl 73.72 x 232.92 x 105.7 mm | 2.9 x 9.17 x 4.16 in | Size: 73.72 x 232.92 x 105.7 mm | 2.9 x 9.17 x 4.16 in | File size: 18.19 mb | Printing Time / Filament: 61 h 24 min / 46 m | ||
 | _142_body_front_cap_L (repaired).stl 3.49 x 3.49 x 6.41 mm | 0.14 x 0.14 x 0.25 in | Size: 3.49 x 3.49 x 6.41 mm | 0.14 x 0.14 x 0.25 in | File size: 0.10 mb | Printing Time / Filament: 2 min / <1 m | ||
 | _143_1_body_center_R (repaired).stl 115.21 x 106 x 112.61 mm | 4.54 x 4.17 x 4.43 in | Size: 115.21 x 106 x 112.61 mm | 4.54 x 4.17 x 4.43 in | File size: 4.34 mb | Printing Time / Filament: 24 h 30 min / 18 m | ||
 | _143_2_body_center_R (repaired).stl 123.12 x 92.54 x 153.27 mm | 4.85 x 3.64 x 6.03 in | Size: 123.12 x 92.54 x 153.27 mm | 4.85 x 3.64 x 6.03 in | File size: 3.72 mb | Printing Time / Filament: 24 h 54 min / 18 m | ||
 Updated | _143_body_center_R (repaired).stl 268.58 x 106 x 123.12 mm | 10.57 x 4.17 x 4.85 in | Size: 268.58 x 106 x 123.12 mm | 10.57 x 4.17 x 4.85 in | File size: 9.16 mb | Printing Time / Filament: 66 h 3 min / 51 m | ||
 | _144_1_body_center_L (repaired).stl 115.21 x 106 x 112.61 mm | 4.54 x 4.17 x 4.43 in | Size: 115.21 x 106 x 112.61 mm | 4.54 x 4.17 x 4.43 in | File size: 3.57 mb | Printing Time / Filament: 24 h 56 min / 18 m | ||
 | _144_2_body_center_L (repaired).stl 123.12 x 92.54 x 153.27 mm | 4.85 x 3.64 x 6.03 in | Size: 123.12 x 92.54 x 153.27 mm | 4.85 x 3.64 x 6.03 in | File size: 3.74 mb | Printing Time / Filament: 24 h 42 min / 18 m | ||
 Updated | _144_body_center_L (repaired).stl 268.58 x 106 x 123.12 mm | 10.57 x 4.17 x 4.85 in | Size: 268.58 x 106 x 123.12 mm | 10.57 x 4.17 x 4.85 in | File size: 9.20 mb | Printing Time / Filament: 66 h 41 min / 51 m | ||
 | _145_body_back_1_R (repaired).stl 234.15 x 96.9 x 44.04 mm | 9.22 x 3.81 x 1.73 in | Size: 234.15 x 96.9 x 44.04 mm | 9.22 x 3.81 x 1.73 in | File size: 6.98 mb | Printing Time / Filament: 42 h 57 min / 28 m | ||
 | _146_body_back_2_R (repaired).stl 26.08 x 31.73 x 9.48 mm | 1.03 x 1.25 x 0.37 in | Size: 26.08 x 31.73 x 9.48 mm | 1.03 x 1.25 x 0.37 in | File size: 1.06 mb | Printing Time / Filament: 26 min / <1 m | ||
 | _147_body_back_1_L (repaired).stl 234.15 x 96.9 x 44.05 mm | 9.22 x 3.81 x 1.73 in | Size: 234.15 x 96.9 x 44.05 mm | 9.22 x 3.81 x 1.73 in | File size: 6.97 mb | Printing Time / Filament: 43 h 16 min / 28 m | ||
 | _148_body_back_2_L (repaired).stl 26.08 x 31.72 x 9.48 mm | 1.03 x 1.25 x 0.37 in | Size: 26.08 x 31.72 x 9.48 mm | 1.03 x 1.25 x 0.37 in | File size: 1.06 mb | Printing Time / Filament: 27 min / <1 m | ||
 | _149_body_back_1 (repaired).stl 211.43 x 156.17 x 167.46 mm | 8.32 x 6.15 x 6.59 in | Size: 211.43 x 156.17 x 167.46 mm | 8.32 x 6.15 x 6.59 in | File size: 5.90 mb | Printing Time / Filament: 68 h 8 min / 39 m | ||
 | _150_body_back_2 (repaired).stl 194.99 x 32.12 x 47.16 mm | 7.68 x 1.26 x 1.86 in | Size: 194.99 x 32.12 x 47.16 mm | 7.68 x 1.26 x 1.86 in | File size: 5.18 mb | Printing Time / Filament: 11 h 38 min / 7 m | ||
 | _151_body_hood (repaired).stl 176.3 x 222.92 x 27.31 mm | 6.94 x 8.78 x 1.08 in | Size: 176.3 x 222.92 x 27.31 mm | 6.94 x 8.78 x 1.08 in | File size: 12.30 mb | Printing Time / Filament: 56 h 41 min / 45 m | ||
 | _152_body_trunk (repaired).stl 194.98 x 153.64 x 27.11 mm | 7.68 x 6.05 x 1.07 in | Size: 194.98 x 153.64 x 27.11 mm | 7.68 x 6.05 x 1.07 in | File size: 6.18 mb | Printing Time / Filament: 44 h 15 min / 37 m | ||
 | _153_spline_front (repaired).stl 176.3 x 4.32 x 14.19 mm | 6.94 x 0.17 x 0.56 in | Size: 176.3 x 4.32 x 14.19 mm | 6.94 x 0.17 x 0.56 in | File size: 2.03 mb | Printing Time / Filament: 55 min / 1 m | ||
 | _154_spline_front_R (repaired).stl 34.22 x 24.38 x 23.52 mm | 1.35 x 0.96 x 0.93 in | Size: 34.22 x 24.38 x 23.52 mm | 1.35 x 0.96 x 0.93 in | File size: 1.64 mb | Printing Time / Filament: 28 min / <1 m | ||
 | _155_spline_front_L (repaired).stl 34.22 x 24.38 x 23.52 mm | 1.35 x 0.96 x 0.93 in | Size: 34.22 x 24.38 x 23.52 mm | 1.35 x 0.96 x 0.93 in | File size: 1.64 mb | Printing Time / Filament: 28 min / <1 m | ||
 | _156_spline_front_side_R (repaired).stl 109.89 x 52.61 x 21.42 mm | 4.33 x 2.07 x 0.84 in | Size: 109.89 x 52.61 x 21.42 mm | 4.33 x 2.07 x 0.84 in | File size: 2.41 mb | Printing Time / Filament: 1 h 7 min / 1 m | ||
 | _157_spline_front_side_L (repaired).stl 109.89 x 52.61 x 21.42 mm | 4.33 x 2.07 x 0.84 in | Size: 109.89 x 52.61 x 21.42 mm | 4.33 x 2.07 x 0.84 in | File size: 2.41 mb | Printing Time / Filament: 1 h 9 min / 1 m | ||
 | _158_spline_top_front (repaired).stl 195.24 x 52.74 x 18.53 mm | 7.69 x 2.08 x 0.73 in | Size: 195.24 x 52.74 x 18.53 mm | 7.69 x 2.08 x 0.73 in | File size: 3.53 mb | Printing Time / Filament: 59 min / 1 m | ||
 | _159_spline_top_back (repaired).stl 172.52 x 94.86 x 4.81 mm | 6.79 x 3.73 x 0.19 in | Size: 172.52 x 94.86 x 4.81 mm | 6.79 x 3.73 x 0.19 in | File size: 6.45 mb | Printing Time / Filament: 48 min / 1 m | ||
 | _160_spline_top_R (repaired).stl 194.47 x 36.85 x 21.37 mm | 7.66 x 1.45 x 0.84 in | Size: 194.47 x 36.85 x 21.37 mm | 7.66 x 1.45 x 0.84 in | File size: 0.89 mb | Printing Time / Filament: 47 min / <1 m | ||
 | _161_spline_top_L (repaired).stl 194.47 x 36.85 x 21.37 mm | 7.66 x 1.45 x 0.84 in | Size: 194.47 x 36.85 x 21.37 mm | 7.66 x 1.45 x 0.84 in | File size: 0.89 mb | Printing Time / Filament: 47 min / <1 m | ||
 | _162_spline_side_1_R (repaired).stl 75.02 x 17.23 x 3.52 mm | 2.95 x 0.68 x 0.14 in | Size: 75.02 x 17.23 x 3.52 mm | 2.95 x 0.68 x 0.14 in | File size: 0.44 mb | Printing Time / Filament: 15 min / <1 m | ||
 | _163_spline_side_2_R (repaired).stl 102.19 x 26.41 x 3.6 mm | 4.02 x 1.04 x 0.14 in | Size: 102.19 x 26.41 x 3.6 mm | 4.02 x 1.04 x 0.14 in | File size: 0.27 mb | Printing Time / Filament: 21 min / <1 m | ||
 | _164_spline_side_3_R (repaired).stl 99.39 x 26.38 x 3.43 mm | 3.91 x 1.04 x 0.14 in | Size: 99.39 x 26.38 x 3.43 mm | 3.91 x 1.04 x 0.14 in | File size: 0.24 mb | Printing Time / Filament: 20 min / <1 m | ||
 | _165_spline_side_4_R (repaired).stl 23.19 x 8 x 3.43 mm | 0.91 x 0.31 x 0.14 in | Size: 23.19 x 8 x 3.43 mm | 0.91 x 0.31 x 0.14 in | File size: 0.36 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _166_spline_side_5_R (repaired).stl 106.51 x 52.69 x 7.15 mm | 4.19 x 2.07 x 0.28 in | Size: 106.51 x 52.69 x 7.15 mm | 4.19 x 2.07 x 0.28 in | File size: 2.61 mb | Printing Time / Filament: 29 min / <1 m | ||
 | _167_spline_side_6_R (repaired).stl 126.1 x 34.05 x 3.83 mm | 4.96 x 1.34 x 0.15 in | Size: 126.1 x 34.05 x 3.83 mm | 4.96 x 1.34 x 0.15 in | File size: 1.03 mb | Printing Time / Filament: 27 min / <1 m | ||
 | _168_spline_side_1_L (repaired).stl 74.85 x 18.28 x 3.49 mm | 2.95 x 0.72 x 0.14 in | Size: 74.85 x 18.28 x 3.49 mm | 2.95 x 0.72 x 0.14 in | File size: 0.44 mb | Printing Time / Filament: 15 min / <1 m | ||
 | _169_spline_side_2_L (repaired).stl 102.61 x 23.35 x 3.57 mm | 4.04 x 0.92 x 0.14 in | Size: 102.61 x 23.35 x 3.57 mm | 4.04 x 0.92 x 0.14 in | File size: 0.27 mb | Printing Time / Filament: 21 min / <1 m | ||
 | _170_spline_side_3_L (repaired).stl 99.49 x 25.75 x 3.43 mm | 3.92 x 1.01 x 0.14 in | Size: 99.49 x 25.75 x 3.43 mm | 3.92 x 1.01 x 0.14 in | File size: 0.24 mb | Printing Time / Filament: 20 min / <1 m | ||
 | _171_spline_side_4_L (repaired).stl 23.19 x 8.06 x 3.42 mm | 0.91 x 0.32 x 0.13 in | Size: 23.19 x 8.06 x 3.42 mm | 0.91 x 0.32 x 0.13 in | File size: 0.36 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _172_spline_side_5_L (repaired).stl 106.51 x 52.69 x 7.15 mm | 4.19 x 2.07 x 0.28 in | Size: 106.51 x 52.69 x 7.15 mm | 4.19 x 2.07 x 0.28 in | File size: 2.61 mb | Printing Time / Filament: 29 min / <1 m | ||
 | _173_spline_side_6_L (repaired).stl 126.13 x 33.96 x 4.55 mm | 4.97 x 1.34 x 0.18 in | Size: 126.13 x 33.96 x 4.55 mm | 4.97 x 1.34 x 0.18 in | File size: 1.03 mb | Printing Time / Filament: 29 min / <1 m | ||
 | _174_spline_back (repaired).stl 194.98 x 15.48 x 4.73 mm | 7.68 x 0.61 x 0.19 in | Size: 194.98 x 15.48 x 4.73 mm | 7.68 x 0.61 x 0.19 in | File size: 4.55 mb | Printing Time / Filament: 25 min / <1 m | ||
 | _175_spline_back_R (repaired).stl 21.23 x 18.12 x 3.41 mm | 0.84 x 0.71 x 0.13 in | Size: 21.23 x 18.12 x 3.41 mm | 0.84 x 0.71 x 0.13 in | File size: 1.99 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _176_spline_back_L (repaired).stl 21.23 x 18.12 x 3.41 mm | 0.84 x 0.71 x 0.13 in | Size: 21.23 x 18.12 x 3.41 mm | 0.84 x 0.71 x 0.13 in | File size: 1.99 mb | Printing Time / Filament: 4 min / <1 m | ||
 | _177_bumper_front (repaired).stl 192.4 x 46.81 x 24.73 mm | 7.57 x 1.84 x 0.97 in | Size: 192.4 x 46.81 x 24.73 mm | 7.57 x 1.84 x 0.97 in | File size: 22.94 mb | Printing Time / Filament: 8 h 54 min / 5 m | ||
 | _178_bumper_front_R (repaired).stl 25.9 x 35.86 x 20.81 mm | 1.02 x 1.41 x 0.82 in | Size: 25.9 x 35.86 x 20.81 mm | 1.02 x 1.41 x 0.82 in | File size: 3.39 mb | Printing Time / Filament: 1 h 6 min / 1 m | ||
 | _179_bumper_front_L (repaired).stl 25.89 x 35.86 x 20.81 mm | 1.02 x 1.41 x 0.82 in | Size: 25.89 x 35.86 x 20.81 mm | 1.02 x 1.41 x 0.82 in | File size: 3.39 mb | Printing Time / Filament: 1 h 6 min / 1 m | ||
 | _180_bumper_front_plate (repaired).stl 43.22 x 21.45 x 1.77 mm | 1.7 x 0.84 x 0.07 in | Size: 43.22 x 21.45 x 1.77 mm | 1.7 x 0.84 x 0.07 in | File size: 3.86 mb | Printing Time / Filament: 25 min / <1 m | ||
 | _181_bumper_front_headlight_base_R (repaired).stl 64.64 x 40.21 x 14.47 mm | 2.54 x 1.58 x 0.57 in | Size: 64.64 x 40.21 x 14.47 mm | 2.54 x 1.58 x 0.57 in | File size: 5.65 mb | Printing Time / Filament: 1 h 22 min / 1 m | ||
 | _182_anti-fog_light_1_R (repaired).stl 38.86 x 11.04 x 11.16 mm | 1.53 x 0.43 x 0.44 in | Size: 38.86 x 11.04 x 11.16 mm | 1.53 x 0.43 x 0.44 in | File size: 0.22 mb | Printing Time / Filament: 21 min / <1 m | ||
 | _182_anti-fog_light_2_R (repaired).stl 20.16 x 5.57 x 1.06 mm | 0.79 x 0.22 x 0.04 in | Size: 20.16 x 5.57 x 1.06 mm | 0.79 x 0.22 x 0.04 in | File size: 0.81 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _182_bumper_front_headlight_1_R (repaired).stl 38.85 x 11.04 x 11.16 mm | 1.53 x 0.43 x 0.44 in | Size: 38.85 x 11.04 x 11.16 mm | 1.53 x 0.43 x 0.44 in | File size: 0.77 mb | Printing Time / Filament: 25 min / <1 m | ||
 | _183_bumper_front_headlight_2_R (repaired).stl 15.38 x 16.88 x 9.94 mm | 0.61 x 0.66 x 0.39 in | Size: 15.38 x 16.88 x 9.94 mm | 0.61 x 0.66 x 0.39 in | File size: 3.03 mb | Printing Time / Filament: 17 min / <1 m | ||
 | _184_bumper_front_headlight_3_R (repaired).stl 15.38 x 16.88 x 9.94 mm | 0.61 x 0.66 x 0.39 in | Size: 15.38 x 16.88 x 9.94 mm | 0.61 x 0.66 x 0.39 in | File size: 3.03 mb | Printing Time / Filament: 17 min / <1 m | ||
 | _185_bumper_front_headlight_base_L (repaired).stl 61.29 x 26.4 x 14.47 mm | 2.41 x 1.04 x 0.57 in | Size: 61.29 x 26.4 x 14.47 mm | 2.41 x 1.04 x 0.57 in | File size: 5.65 mb | Printing Time / Filament: 1 h 21 min / 1 m | ||
 | _186_anti-fog_light_1_L (repaired).stl 38.86 x 11.04 x 11.16 mm | 1.53 x 0.43 x 0.44 in | Size: 38.86 x 11.04 x 11.16 mm | 1.53 x 0.43 x 0.44 in | File size: 0.22 mb | Printing Time / Filament: 20 min / <1 m | ||
 | _186_anti-fog_light_2_L (repaired).stl 20.16 x 5.57 x 1.06 mm | 0.79 x 0.22 x 0.04 in | Size: 20.16 x 5.57 x 1.06 mm | 0.79 x 0.22 x 0.04 in | File size: 0.81 mb | Printing Time / Filament: 3 min / <1 m | ||
 | _186_bumper_front_headlight_1_L (repaired).stl 38.86 x 11.04 x 11.16 mm | 1.53 x 0.43 x 0.44 in | Size: 38.86 x 11.04 x 11.16 mm | 1.53 x 0.43 x 0.44 in | File size: 0.77 mb | Printing Time / Filament: 25 min / <1 m | ||
 | _187_bumper_front_headlight_2_L (repaired).stl 15.38 x 16.88 x 9.94 mm | 0.61 x 0.66 x 0.39 in | Size: 15.38 x 16.88 x 9.94 mm | 0.61 x 0.66 x 0.39 in | File size: 3.03 mb | Printing Time / Filament: 17 min / <1 m | ||
 | _188_bumper_front_headlight_3_L (repaired).stl 15.38 x 16.88 x 9.94 mm | 0.61 x 0.66 x 0.39 in | Size: 15.38 x 16.88 x 9.94 mm | 0.61 x 0.66 x 0.39 in | File size: 3.03 mb | Printing Time / Filament: 17 min / <1 m | ||
 | _189_bumper_front_grid (repaired).stl 177.05 x 22.39 x 23.67 mm | 6.97 x 0.88 x 0.93 in | Size: 177.05 x 22.39 x 23.67 mm | 6.97 x 0.88 x 0.93 in | File size: 1.36 mb | Printing Time / Filament: 3 h 26 min / 2 m | ||
 | _190_bumper_front_grid_plate (repaired).stl 32.1 x 10.1 x 6.05 mm | 1.26 x 0.4 x 0.24 in | Size: 32.1 x 10.1 x 6.05 mm | 1.26 x 0.4 x 0.24 in | File size: 3.93 mb | Printing Time / Filament: 9 min / <1 m | ||
 Updated | _191_bumper_back (repaired).stl 247.96 x 42.79 x 14.66 mm | 9.76 x 1.68 x 0.58 in | Size: 247.96 x 42.79 x 14.66 mm | 9.76 x 1.68 x 0.58 in | File size: 17.29 mb | Printing Time / Filament: 9 h 4 min / 5 m | ||
 | _192_bumper_back_plate (repaired).stl 43.23 x 21.44 x 1.77 mm | 1.7 x 0.84 x 0.07 in | Size: 43.23 x 21.44 x 1.77 mm | 1.7 x 0.84 x 0.07 in | File size: 3.85 mb | Printing Time / Filament: 25 min / <1 m | ||
 | _193_bumper_back_headlight_base_R (repaired).stl 79.82 x 15.75 x 13.01 mm | 3.14 x 0.62 x 0.51 in | Size: 79.82 x 15.75 x 13.01 mm | 3.14 x 0.62 x 0.51 in | File size: 0.87 mb | Printing Time / Filament: 1 h 19 min / 1 m | ||
 | _194_bumper_back_headlight_R (repaired).stl 74.76 x 10.78 x 1.7 mm | 2.94 x 0.42 x 0.07 in | Size: 74.76 x 10.78 x 1.7 mm | 2.94 x 0.42 x 0.07 in | File size: 1.72 mb | Printing Time / Filament: 23 min / <1 m | ||
 | _195_bumper_back_headlight_base_L (repaired).stl 79.82 x 15.75 x 13.01 mm | 3.14 x 0.62 x 0.51 in | Size: 79.82 x 15.75 x 13.01 mm | 3.14 x 0.62 x 0.51 in | File size: 0.87 mb | Printing Time / Filament: 1 h 18 min / 1 m | ||
 | _196_bumper_back_headlight_L (repaired).stl 74.76 x 10.78 x 1.7 mm | 2.94 x 0.42 x 0.07 in | Size: 74.76 x 10.78 x 1.7 mm | 2.94 x 0.42 x 0.07 in | File size: 1.73 mb | Printing Time / Filament: 23 min / <1 m | ||
 | _197_door_front_R (repaired).stl 32.28 x 122.12 x 97.69 mm | 1.27 x 4.81 x 3.85 in | Size: 32.28 x 122.12 x 97.69 mm | 1.27 x 4.81 x 3.85 in | File size: 6.31 mb | Printing Time / Filament: 16 h 38 min / 12 m | ||
 | _198_door_back_R (repaired).stl 27.7 x 131 x 105.34 mm | 1.09 x 5.16 x 4.15 in | Size: 27.7 x 131 x 105.34 mm | 1.09 x 5.16 x 4.15 in | File size: 7.40 mb | Printing Time / Filament: 16 h 41 min / 11 m | ||
 | _199_door_front_L (repaired).stl 32.28 x 122.12 x 97.69 mm | 1.27 x 4.81 x 3.85 in | Size: 32.28 x 122.12 x 97.69 mm | 1.27 x 4.81 x 3.85 in | File size: 6.31 mb | Printing Time / Filament: 16 h 41 min / 12 m | ||
 | _200_door_back_L (repaired).stl 27.7 x 131 x 105.34 mm | 1.09 x 5.16 x 4.15 in | Size: 27.7 x 131 x 105.34 mm | 1.09 x 5.16 x 4.15 in | File size: 7.40 mb | Printing Time / Filament: 16 h 56 min / 11 m | ||
 | _201_door_mirror_R (repaired).stl 15.23 x 19.53 x 22.54 mm | 0.6 x 0.77 x 0.89 in | Size: 15.23 x 19.53 x 22.54 mm | 0.6 x 0.77 x 0.89 in | File size: 1.89 mb | Printing Time / Filament: 22 min / <1 m | ||
 | _202_door_handle_1_R (repaired).stl 23.74 x 9.15 x 6.87 mm | 0.93 x 0.36 x 0.27 in | Size: 23.74 x 9.15 x 6.87 mm | 0.93 x 0.36 x 0.27 in | File size: 1.15 mb | Printing Time / Filament: 8 min / <1 m | ||
 | _203_door_handle_2_R (repaired).stl 23.74 x 9.2 x 6.88 mm | 0.93 x 0.36 x 0.27 in | Size: 23.74 x 9.2 x 6.88 mm | 0.93 x 0.36 x 0.27 in | File size: 1.15 mb | Printing Time / Filament: 8 min / <1 m | ||
 | _204_door_mirror_L (repaired).stl 15.23 x 19.53 x 22.54 mm | 0.6 x 0.77 x 0.89 in | Size: 15.23 x 19.53 x 22.54 mm | 0.6 x 0.77 x 0.89 in | File size: 1.89 mb | Printing Time / Filament: 22 min / <1 m | ||
 | _205_door_handle_1_L (repaired).stl 23.76 x 9.02 x 6.85 mm | 0.94 x 0.36 x 0.27 in | Size: 23.76 x 9.02 x 6.85 mm | 0.94 x 0.36 x 0.27 in | File size: 1.15 mb | Printing Time / Filament: 8 min / <1 m | ||
 | _206_door_handle_2_L (repaired).stl 23.74 x 9.14 x 6.87 mm | 0.93 x 0.36 x 0.27 in | Size: 23.74 x 9.14 x 6.87 mm | 0.93 x 0.36 x 0.27 in | File size: 1.15 mb | Printing Time / Filament: 8 min / <1 m | ||
 | _207_door_front_window_R (repaired).stl 20.61 x 107.85 x 38.75 mm | 0.81 x 4.25 x 1.53 in | Size: 20.61 x 107.85 x 38.75 mm | 0.81 x 4.25 x 1.53 in | File size: 0.64 mb | Printing Time / Filament: 1 h 32 min / 1 m | ||
 | _208_door_front_window_L (repaired).stl 20.61 x 107.85 x 38.75 mm | 0.81 x 4.25 x 1.53 in | Size: 20.61 x 107.85 x 38.75 mm | 0.81 x 4.25 x 1.53 in | File size: 0.64 mb | Printing Time / Filament: 1 h 33 min / 1 m | ||
 | _209_door_back_window_R (repaired).stl 17.87 x 46.94 x 85.68 mm | 0.7 x 1.85 x 3.37 in | Size: 17.87 x 46.94 x 85.68 mm | 0.7 x 1.85 x 3.37 in | File size: 1.02 mb | Printing Time / Filament: 1 h 13 min / 1 m | ||
 | _210_door_back_window_L (repaired).stl 17.87 x 47.44 x 85.51 mm | 0.7 x 1.87 x 3.37 in | Size: 17.87 x 47.44 x 85.51 mm | 0.7 x 1.87 x 3.37 in | File size: 1.02 mb | Printing Time / Filament: 1 h 13 min / 1 m | ||
 | _211_cockpit_mirror (repaired).stl 27.45 x 10.05 x 14.88 mm | 1.08 x 0.4 x 0.59 in | Size: 27.45 x 10.05 x 14.88 mm | 1.08 x 0.4 x 0.59 in | File size: 1.01 mb | Printing Time / Filament: 16 min / <1 m | ||
 | _212_cockpit_seat_front (repaired).stl 183.89 x 75.91 x 84.57 mm | 7.24 x 2.99 x 3.33 in | Size: 183.89 x 75.91 x 84.57 mm | 7.24 x 2.99 x 3.33 in | File size: 19.05 mb | Printing Time / Filament: 37 h 20 min / 23 m | ||
 | _213_cockpit_seat_back (repaired).stl 183.89 x 88.13 x 81.48 mm | 7.24 x 3.47 x 3.21 in | Size: 183.89 x 88.13 x 81.48 mm | 7.24 x 3.47 x 3.21 in | File size: 23.56 mb | Printing Time / Filament: 39 h 57 min / 24 m | ||
 | _214_cockpit_carpet_front_R (repaired).stl 56.35 x 61.05 x 1.62 mm | 2.22 x 2.4 x 0.06 in | Size: 56.35 x 61.05 x 1.62 mm | 2.22 x 2.4 x 0.06 in | File size: 1.21 mb | Printing Time / Filament: 1 h 10 min / 1 m | ||
 | _215_cockpit_carpet_back_R (repaired).stl 60.93 x 42.83 x 1.62 mm | 2.4 x 1.69 x 0.06 in | Size: 60.93 x 42.83 x 1.62 mm | 2.4 x 1.69 x 0.06 in | File size: 1.21 mb | Printing Time / Filament: 53 min / <1 m | ||
 | _216_cockpit_carpet_front_L (repaired).stl 56.35 x 61.05 x 1.62 mm | 2.22 x 2.4 x 0.06 in | Size: 56.35 x 61.05 x 1.62 mm | 2.22 x 2.4 x 0.06 in | File size: 1.21 mb | Printing Time / Filament: 1 h 9 min / 1 m | ||
 | _217_cockpit_carpet_back_L (repaired).stl 60.93 x 42.83 x 1.62 mm | 2.4 x 1.69 x 0.06 in | Size: 60.93 x 42.83 x 1.62 mm | 2.4 x 1.69 x 0.06 in | File size: 1.21 mb | Printing Time / Filament: 53 min / <1 m | ||
 | _218_cockpit_pedals (repaired).stl 34.16 x 36.84 x 35.56 mm | 1.34 x 1.45 x 1.4 in | Size: 34.16 x 36.84 x 35.56 mm | 1.34 x 1.45 x 1.4 in | File size: 0.79 mb | Printing Time / Filament: 1 h 58 min / 1 m | ||
 | _219_1_cockpit_panel (repaired).stl 191.33 x 60.43 x 46.7 mm | 7.53 x 2.38 x 1.84 in | Size: 191.33 x 60.43 x 46.7 mm | 7.53 x 2.38 x 1.84 in | File size: 17.69 mb | Printing Time / Filament: 21 h 38 min / 13 m | ||
 | _219_2_cockpit_panel (repaired).stl 54.32 x 19.93 x 18.96 mm | 2.14 x 0.78 x 0.75 in | Size: 54.32 x 19.93 x 18.96 mm | 2.14 x 0.78 x 0.75 in | File size: 1.62 mb | Printing Time / Filament: 1 h 8 min / 1 m | ||
 | _219_cockpit_panel (repaired).stl 191.33 x 60.43 x 46.7 mm | 7.53 x 2.38 x 1.84 in | Size: 191.33 x 60.43 x 46.7 mm | 7.53 x 2.38 x 1.84 in | File size: 14.48 mb | Printing Time / Filament: 20 h 49 min / 12 m | ||
 | _220_cockpit_cross (repaired).stl 32.48 x 4.37 x 45.66 mm | 1.28 x 0.17 x 1.8 in | Size: 32.48 x 4.37 x 45.66 mm | 1.28 x 0.17 x 1.8 in | File size: 7.00 mb | Printing Time / Filament: 48 min / <1 m | ||
 | _221_engine_body_cover (repaired).stl 135.49 x 82.86 x 27.28 mm | 5.33 x 3.26 x 1.07 in | Size: 135.49 x 82.86 x 27.28 mm | 5.33 x 3.26 x 1.07 in | File size: 3.76 mb | Printing Time / Filament: 16 h 30 min / 9 m | ||
 | _222_engine_exhaust_R (repaired).stl 93.92 x 18.05 x 65.02 mm | 3.7 x 0.71 x 2.56 in | Size: 93.92 x 18.05 x 65.02 mm | 3.7 x 0.71 x 2.56 in | File size: 3.93 mb | Printing Time / Filament: 4 h 21 min / 3 m | ||
 | _223_engine_exhaust_L (repaired).stl 93.92 x 18.05 x 65.02 mm | 3.7 x 0.71 x 2.56 in | Size: 93.92 x 18.05 x 65.02 mm | 3.7 x 0.71 x 2.56 in | File size: 3.94 mb | Printing Time / Filament: 4 h 14 min / 3 m | ||
 | _224_engine_1 (repaired).stl 64.67 x 60.32 x 50.05 mm | 2.55 x 2.37 x 1.97 in | Size: 64.67 x 60.32 x 50.05 mm | 2.55 x 2.37 x 1.97 in | File size: 9.03 mb | Printing Time / Filament: 4 h 35 min / 3 m | ||
 | _225_engine_3 (repaired).stl 69.16 x 66.92 x 100 mm | 2.72 x 2.63 x 3.94 in | Size: 69.16 x 66.92 x 100 mm | 2.72 x 2.63 x 3.94 in | File size: 14.27 mb | Printing Time / Filament: 22 h 18 min / 12 m | ||
 | _226_engine_4 (repaired).stl 36.34 x 72.57 x 10.51 mm | 1.43 x 2.86 x 0.41 in | Size: 36.34 x 72.57 x 10.51 mm | 1.43 x 2.86 x 0.41 in | File size: 9.89 mb | Printing Time / Filament: 1 h 9 min / 1 m | ||
 | _227_engine_5 (repaired).stl 36.34 x 72.57 x 10.51 mm | 1.43 x 2.86 x 0.41 in | Size: 36.34 x 72.57 x 10.51 mm | 1.43 x 2.86 x 0.41 in | File size: 9.89 mb | Printing Time / Filament: 1 h 9 min / 1 m | ||
 | _228_engine_6 (repaired).stl 36.51 x 28.74 x 8.59 mm | 1.44 x 1.13 x 0.34 in | Size: 36.51 x 28.74 x 8.59 mm | 1.44 x 1.13 x 0.34 in | File size: 3.39 mb | Printing Time / Filament: 58 min / <1 m | ||
 | _229_engine_7 (repaired).stl 20.36 x 19.98 x 14.6 mm | 0.8 x 0.79 x 0.57 in | Size: 20.36 x 19.98 x 14.6 mm | 0.8 x 0.79 x 0.57 in | File size: 11.88 mb | Printing Time / Filament: 32 min / <1 m | ||
 | _230_engine_8 (repaired).stl 30 x 30 x 48.7 mm | 1.18 x 1.18 x 1.92 in | Size: 30 x 30 x 48.7 mm | 1.18 x 1.18 x 1.92 in | File size: 0.53 mb | Printing Time / Filament: 2 h 51 min / 2 m | ||
 | _231_engine_9 (repaired).stl 41.41 x 41.41 x 6.5 mm | 1.63 x 1.63 x 0.26 in | Size: 41.41 x 41.41 x 6.5 mm | 1.63 x 1.63 x 0.26 in | File size: 2.43 mb | Printing Time / Filament: 35 min / <1 m | ||
 | _232_engine_10 (repaired).stl 21 x 22.26 x 32.2 mm | 0.83 x 0.88 x 1.27 in | Size: 21 x 22.26 x 32.2 mm | 0.83 x 0.88 x 1.27 in | File size: 3.30 mb | Printing Time / Filament: 1 h 41 min / 1 m | ||
 | _233_engine_11 (repaired).stl 29.24 x 21.68 x 11.5 mm | 1.15 x 0.85 x 0.45 in | Size: 29.24 x 21.68 x 11.5 mm | 1.15 x 0.85 x 0.45 in | File size: 0.57 mb | Printing Time / Filament: 18 min / <1 m | ||
 | _234_engine_12 (repaired).stl 32.04 x 136 x 12.84 mm | 1.26 x 5.35 x 0.51 in | Size: 32.04 x 136 x 12.84 mm | 1.26 x 5.35 x 0.51 in | File size: 1.39 mb | Printing Time / Filament: 47 min / 1 m | ||
 | _235_engine_13 (repaired).stl 31.31 x 130.51 x 8.5 mm | 1.23 x 5.14 x 0.33 in | Size: 31.31 x 130.51 x 8.5 mm | 1.23 x 5.14 x 0.33 in | File size: 1.31 mb | Printing Time / Filament: 35 min / <1 m | ||
 | _236_engine_14 (repaired).stl 37.22 x 37.8 x 35.43 mm | 1.47 x 1.49 x 1.39 in | Size: 37.22 x 37.8 x 35.43 mm | 1.47 x 1.49 x 1.39 in | File size: 3.69 mb | Printing Time / Filament: 53 min / <1 m | ||
 | _237_engine_15 (repaired).stl 42.95 x 29.82 x 146.91 mm | 1.69 x 1.17 x 5.78 in | Size: 42.95 x 29.82 x 146.91 mm | 1.69 x 1.17 x 5.78 in | File size: 3.46 mb | Printing Time / Filament: 2 h 42 min / 1 m | ||
 | _238_engine_16 (repaired).stl 31.91 x 21.19 x 23.95 mm | 1.26 x 0.83 x 0.94 in | Size: 31.91 x 21.19 x 23.95 mm | 1.26 x 0.83 x 0.94 in | File size: 1.33 mb | Printing Time / Filament: 1 h 22 min / 1 m | ||
 | _239_engine_17 (repaired).stl 37.14 x 23.55 x 22.17 mm | 1.46 x 0.93 x 0.87 in | Size: 37.14 x 23.55 x 22.17 mm | 1.46 x 0.93 x 0.87 in | File size: 0.77 mb | Printing Time / Filament: 1 h 42 min / 1 m | ||
 | _240_engine_18 (repaired).stl 96.65 x 38.58 x 10.09 mm | 3.81 x 1.52 x 0.4 in | Size: 96.65 x 38.58 x 10.09 mm | 3.81 x 1.52 x 0.4 in | File size: 2.54 mb | Printing Time / Filament: 3 h 36 min / 2 m | ||
 | _241_engine_2 (repaired).stl 31.81 x 59.24 x 27.91 mm | 1.25 x 2.33 x 1.1 in | Size: 31.81 x 59.24 x 27.91 mm | 1.25 x 2.33 x 1.1 in | File size: 9.06 mb | Printing Time / Filament: 2 h 5 min / 1 m | ||
 | _242_cut_beams_x2 (repaired).stl 14.27 x 14 x 8.91 mm | 0.56 x 0.55 x 0.35 in | Size: 14.27 x 14 x 8.91 mm | 0.56 x 0.55 x 0.35 in | File size: 0.01 mb | Printing Time / Filament: 13 min / <1 m | ||
 | _243_indoor_Handle_1_x4 (repaired).stl 18.96 x 8.31 x 8 mm | 0.75 x 0.33 x 0.31 in | Size: 18.96 x 8.31 x 8 mm | 0.75 x 0.33 x 0.31 in | File size: 0.46 mb | Printing Time / Filament: 7 min / <1 m | ||
 | _244_indoor_Handle_2_x2 (repaired).stl 21.66 x 7.6 x 6.9 mm | 0.85 x 0.3 x 0.27 in | Size: 21.66 x 7.6 x 6.9 mm | 0.85 x 0.3 x 0.27 in | File size: 0.21 mb | Printing Time / Filament: 5 min / <1 m | ||
 | _245_door_front_window_v2_1_L (repaired).stl 16.93 x 46.12 x 24.63 mm | 0.67 x 1.82 x 0.97 in | Size: 16.93 x 46.12 x 24.63 mm | 0.67 x 1.82 x 0.97 in | File size: 0.41 mb | Printing Time / Filament: 21 min / <1 m | ||
 | _246_door_front_window_v2_2_L (repaired).stl 8.91 x 75.23 x 8.04 mm | 0.35 x 2.96 x 0.32 in | Size: 8.91 x 75.23 x 8.04 mm | 0.35 x 2.96 x 0.32 in | File size: 0.26 mb | Printing Time / Filament: 16 min / <1 m | ||
 | _247_door_front_window_v2_1_R (repaired).stl 16.88 x 46.13 x 24.64 mm | 0.66 x 1.82 x 0.97 in | Size: 16.88 x 46.13 x 24.64 mm | 0.66 x 1.82 x 0.97 in | File size: 0.41 mb | Printing Time / Filament: 24 min / <1 m | ||
 | _248_door_front_window_v2_2_R (repaired).stl 8.91 x 75.23 x 8.04 mm | 0.35 x 2.96 x 0.32 in | Size: 8.91 x 75.23 x 8.04 mm | 0.35 x 2.96 x 0.32 in | File size: 0.26 mb | Printing Time / Filament: 16 min / <1 m | ||
 | _249_bumper_headlight_glass_L (repaired).stl 12.72 x 13.81 x 17.12 mm | 0.5 x 0.54 x 0.67 in | Size: 12.72 x 13.81 x 17.12 mm | 0.5 x 0.54 x 0.67 in | File size: 0.10 mb | Printing Time / Filament: 9 min / <1 m | ||
 | _250_bumper_headlight_glass_R (repaired).stl 13.91 x 14.79 x 17.12 mm | 0.55 x 0.58 x 0.67 in | Size: 13.91 x 14.79 x 17.12 mm | 0.55 x 0.58 x 0.67 in | File size: 0.10 mb | Printing Time / Filament: 9 min / <1 m | ||
 | _251_foglight_holder_R (repaired).stl 9.62 x 7.62 x 25.83 mm | 0.38 x 0.3 x 1.02 in | Size: 9.62 x 7.62 x 25.83 mm | 0.38 x 0.3 x 1.02 in | File size: 1.46 mb | Printing Time / Filament: 13 min / <1 m | ||
 | _252_alleylight_holder_L (repaired).stl 9.62 x 7.62 x 25.83 mm | 0.38 x 0.3 x 1.02 in | Size: 9.62 x 7.62 x 25.83 mm | 0.38 x 0.3 x 1.02 in | File size: 1.46 mb | Printing Time / Filament: 13 min / <1 m | ||
 | _253_alleylight_body_R (repaired).stl 18.59 x 18.61 x 13.29 mm | 0.73 x 0.73 x 0.52 in | Size: 18.59 x 18.61 x 13.29 mm | 0.73 x 0.73 x 0.52 in | File size: 2.67 mb | Printing Time / Filament: 27 min / <1 m | ||
 | _254_alleylight_body_L (repaired).stl 18.61 x 18.61 x 12.97 mm | 0.73 x 0.73 x 0.51 in | Size: 18.61 x 18.61 x 12.97 mm | 0.73 x 0.73 x 0.51 in | File size: 2.67 mb | Printing Time / Filament: 26 min / <1 m | ||
 | _255_alleylight_glass_x2 (repaired).stl 13.75 x 13.75 x 3.93 mm | 0.54 x 0.54 x 0.15 in | Size: 13.75 x 13.75 x 3.93 mm | 0.54 x 0.54 x 0.15 in | File size: 0.51 mb | Printing Time / Filament: 6 min / <1 m | ||
 | _256_front_antenna (repaired).stl 3.12 x 3.12 x 44.56 mm | 0.12 x 0.12 x 1.75 in | Size: 3.12 x 3.12 x 44.56 mm | 0.12 x 0.12 x 1.75 in | File size: 0.09 mb | Printing Time / Filament: 5 min / <1 m | ||
 | Keychain (repaired).stl 29.68 x 29.69 x 2.42 mm | 1.17 x 1.17 x 0.1 in | Size: 29.68 x 29.69 x 2.42 mm | 1.17 x 1.17 x 0.1 in | File size: 0.37 mb | Printing Time / Filament: 23 min / <1 m | ||
 | Tag (repaired).stl 150.15 x 18.16 x 4.59 mm | 5.91 x 0.71 x 0.18 in | Size: 150.15 x 18.16 x 4.59 mm | 5.91 x 0.71 x 0.18 in | File size: 1.78 mb | Printing Time / Filament: 1 h 18 min / 1 m | ||
Models are regularly enhanced with updates and adjustments based on customer feedback. View update history
Description
ABOUT THIS 3D MODEL
This 3D Model of Interstellar Ranger consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.
Chevrolet Impala 1967 is not just a prop in the longest-running fantasy TV series. Affectionately nicknamed “Metallicar” by Supernatural fans, Dean Winchester’s “Baby” is more of an independent character than a car, as it will always be the Winchesters’ loyal companion and a trademark to the show.
The monster-hunting brothers have been travelling across the country while battling every imaginable evil and subjected the Impala to every possible crash in the course of 15 seasons of the show. However, Chevy Impala model for 3D printing by our contributing 3D artist looks like it is fresh from the auto show. The 3D artist dedicated many hours of work depicting the iconic retro vehicle and stuffed it with lots of cool features that will rejoice both the Supernatural and modelling enthusiasts. Baby sports a Kansas license plate that reads “KAZ 2Y5” and even has a cross in the trunk. 3D print the legendary Chevrolet Impala and get ready to repel evil spirits!
ADAPTATION FOR 3D PRINTING
Chevrolet Impala 1967 3D printing model is a highly-detailed action assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 125 hours in total.
In order to preserve the accurate likeness of the original 1967 Chevrolet Impala car, the model was divided into many parts that are to be assembled as if a real vehicle. Taking into account the willingness of our customers to make their 3D printing projects as true to life as possible, Gambody team worked on the highly-articulated assembly of the vehicle that presupposes active suspension and a variety of movable elements.
Thus, various special mechanisms were introduced into the model to make sure that the parts comprising the suspension, as well as the details of the frame and the car body, are both authentic and highly functional (please, see "Versions' specifications", "Assembly video" and photo preview slider).
The cutting of the model was chosen to ensure the cleanest 3D printing result possible and to minimize the amount of material needed to print the generated support. All assembly parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate. We highly recommend that you get acquainted with the “Assembly video” and "Assembly Manual" before getting down to assembling the iconic Chevrolet Impala 1967.
The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.
VERSION'S SPECIFICATIONS
FFF/FDM 1.1 version features:
- Contains 266 parts;
- A printed model is 180 mm tall, 257 mm wide, 677 mm deep;
- New illuminable spotlights on the side arches of the windshield;
- A radio antenna;
- Opening glove box;
- Window cranks and rear door opening handles;
- Fog lights and turn signals can be illuminated;
- 2 variants for front windows - closed and lowered;
- Reinforced connection of the body's rear parts;
- New front seat design;
- Chevrolet Impala 1967 from the version FFF/FDM 1.0 can be updated by replacing the doors, dashboard, and front seats from the FFF/FDM 1.1 version. The front lights are glued to the model.
FFF/FDM 1.0 version features:
- The model's scale was calculated from the actual length of the Chevrolet Impala 1967 that is 5410 mm. The 3D printing model's chosen scale is 1:8 for the FFF/FDM version;
- When printed the Chevrolet Impala 1967 will stand 180 mm tall, 257 mm wide, 677 mm deep;
Suspension:
- The authentic active suspension of the model's front and rear axles is equipped with independent shock-absorbers;
- The assembly of the shock-absorbers requires 4 regular ball pen springs and additional "pins" that can be made out of short pieces of regular 1.75mm filament;
- The mechanism of the steering rack allows the simultaneous movement of the wheels (incl. via steering wheel);
- Simultaneous movement of the rear wheels rotates the crankshaft;
Engine:
- The model is equipped with an authentic V8 engine;
Wheels:
- Both front and rear wheels rotate;
- Wheel tyres can be printed either with plastic filament or with flexible material;
Car Body:
- The model's hood, trunk and the four doors open in order to access the highly-detailed interior of the Impala;
- The steering wheel rotates and can also turn the front wheels (via the functioning steering rack);
- The car's windshield, windows, headlights and taillights are provided separately to be printed with the transparent filament;
- LED wiring can be easily installed throughout the body of the Impala, while the battery can be hidden inside the opening hood;
- Windscreen wipers are articulated;
Arsenal:
- There is a cross in the trunk to repel evil spirits;
- The vehicle's registration plate and Chevrolet emblem are made to resemble the authentic ones and are to be glued;
- All parts are divided in such a way that you will print them with the smallest number of support structures;
Chevrolet Impala 1967 3D printing model comes with an "Assembly video" and "Assembly Manual" in PDF format that we highly recommend that you watch before printing!
You can get the model of Chevrolet Impala 1967 for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.
Watch the tutorial on how to assemble Chevrolet Impala 1967 3D Printing Model at Gambody YouTube channel.
Also, you may like Dean Winchester3D Printing Figurine, as well as other Vehicle3D Printing Models.
_______
FAQ:
Feedback
Average customer rating (19 reviews)
4.4
Ratings breakdown
Click a star rating to filter reviews
5
13
4
4
3 0
2 0
1
2
Overall experience
Level of detail in the model
4.4
Model cut quality and assembly guide
4.4
Clarity and accuracy of the model page
4.4
Socer
Verified purchase Overall it's good, but the doors need adjusting.
Reviewed in Türkiye on January 24, 2026
Overall experience
Level of detail in the model
4.5
Model cut quality and assembly guide
4
Clarity and accuracy of the model page
4.2
The front and rear doors are misaligned. The rear door cannot be opened without opening the front door. It would be helpful if you could adjust them. Thank you.
. Comments (1)
Julia Layton
Replied on January 29, 2026
Community Support Team Hello! We’re sorry to hear that you’re experiencing issues with the Chevrolet Impala 1967 3D Model.
We’ve checked this point with both our Moderation Team and the model’s designer, John Nixon. Unfortunately, this behavior cannot be changed without redesigning the entire door mechanism. The doors were intentionally designed this way to achieve the tightest possible fit and clean appearance when closed. Because of this construction, the front door needs to be opened first before the rear door can move.
We understand that an independent opening sequence could be more convenient, but altering it would compromise the alignment and visual accuracy the author aimed for.
Thank you for your patience, and we appreciate you bringing this to our attention. If you have any other questions, please feel free to reach out – we’re always happy to assist.
We’ve checked this point with both our Moderation Team and the model’s designer, John Nixon. Unfortunately, this behavior cannot be changed without redesigning the entire door mechanism. The doors were intentionally designed this way to achieve the tightest possible fit and clean appearance when closed. Because of this construction, the front door needs to be opened first before the rear door can move.
We understand that an independent opening sequence could be more convenient, but altering it would compromise the alignment and visual accuracy the author aimed for.
Thank you for your patience, and we appreciate you bringing this to our attention. If you have any other questions, please feel free to reach out – we’re always happy to assist.
revrnd
Verified purchase Quick rating from the old site version (no comment)
Reviewed in Australia on September 08, 2024
Overall experience
Level of detail in the model
1
Model cut quality and assembly guide
1
Clarity and accuracy of the model page
1
User ID: 108996
Verified purchase Quick rating from the old site version (no comment)
Reviewed on June 30, 2024
Overall experience
Level of detail in the model
4
Model cut quality and assembly guide
4
Clarity and accuracy of the model page
4
User ID: 55491
Verified purchase Quick rating from the old site version (no comment)
Reviewed on June 05, 2024
Overall experience
Level of detail in the model
1
Model cut quality and assembly guide
1
Clarity and accuracy of the model page
1
User ID: 94910
This feedback is from a user who hasn't purchased this model Quick rating from the old site version (no comment)
Reviewed on July 28, 2023
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
User ID: 90976
This feedback is from a user who hasn't purchased this model Quick rating from the old site version (no comment)
Reviewed on April 26, 2023
Overall experience
Level of detail in the model
4
Model cut quality and assembly guide
4
Clarity and accuracy of the model page
4
User ID: 76922
Verified purchase Quick rating from the old site version (no comment)
Reviewed on June 11, 2022
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
User ID: 69925
Verified purchase Quick rating from the old site version (no comment)
Reviewed on January 21, 2022
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
User ID: 65208
This feedback is from a user who hasn't purchased this model Quick rating from the old site version (no comment)
Reviewed on December 06, 2021
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Elliot Smith
Verified purchase Quick rating from the old site version (no comment)
Reviewed in United States of America on October 20, 2021
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
User ID: 59725
Verified purchase Quick rating from the old site version (no comment)
Reviewed on October 11, 2021
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
User ID: 61600
This feedback is from a user who hasn't purchased this model Quick rating from the old site version (no comment)
Reviewed on September 06, 2021
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Poohaty
This feedback is from a user who hasn't purchased this model Quick rating from the old site version (no comment)
Reviewed in Poland on April 05, 2021
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
User ID: 53165
This feedback is from a user who hasn't purchased this model Quick rating from the old site version (no comment)
Reviewed on March 26, 2021
Overall experience
Level of detail in the model
4
Model cut quality and assembly guide
4
Clarity and accuracy of the model page
4
User ID: 28258
Verified purchase Quick rating from the old site version (no comment)
Reviewed on March 19, 2021
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
User ID: 42352
This feedback is from a user who hasn't purchased this model Quick rating from the old site version (no comment)
Reviewed on March 15, 2021
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Dennis Lee
This feedback is from a user who hasn't purchased this model Quick rating from the old site version (no comment)
Reviewed in Denmark on March 11, 2021
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Aleksandr I.
This feedback is from a user who hasn't purchased this model Quick rating from the old site version (no comment)
Reviewed in United Kingdom of Great Britain and Northern Ireland on March 11, 2021
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Gambody Support
Community Support Team Quick rating from the old site version (no comment)
Reviewed in United Kingdom of Great Britain and Northern Ireland on March 11, 2021
Overall experience
Level of detail in the model
5
Model cut quality and assembly guide
5
Clarity and accuracy of the model page
5
Printing Details
Below you'll find detailed slicing settings for Bambu Studio 2.0+, Orca Slicer 2.0+, UltiMaker Cura 5.0+, PrusaSlicer 2.0+, Slic3r 1.3+, Simplify3D 5.0+ to help you get the best results when printing this model. These settings are optimized specifically for this 3D model, but please note they may need slight adjustments depending on your printer or filament. When in doubt, refer to your printer's user manual.
Important
To avoid printing issues and achieve the best quality, we highly recommend applying the following settings:
Bambu Studio 2.0+ Settings name
Option
Quality Tab
Layer height
Layer Height
0.12 - 0.20 mm
For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
First layer height
0.20 - 0.28 mm
120-150% of your Layer Height
Line width
Default:
0.42 mm
Initial Layer
0.50 - 0.60 mm
Outer wall
0.40 mm
Inner wall
0.45 mm
Top surface
0.45 mm
Sparse infill
0.45 mm
Internal solid infill
0.42 mm
Support
0.42 mm
Seam
Seam position
Aligned
But you can paint the seam if you want.
Smart scarf seam application
✔
Scarf application angle threshold
155.0 °
Scarf steps
10.0
Scarf joint for inner walls
✔
Role-based wipe speed
✔
Precision
Slice gap closing radius
0.0490 mm
Resolution
0.0120 mm
Arc fitting
✔
X-Y hole compensation
0.010 - 0.050 mm
You have to calibrate this parameter
X-Y contour compensation
0.010 - 0.050 mm
You have to calibrate this parameter
Elephant foot compensation
0.10 - 0.20 mm
You have to calibrate this parameter
Wall generator
Wall generator
Classic
Wall transitioning threshold angle
10.0 °
Wall transitioning filter margin
25.0 %
Wall transition length
100.0 %
Minimum wall width
85.0 %
Minimum feature size
25.0 %
Advanced
Order of walls
inner/outer
Bridge flow
0.85
Only one wall on top surfaces
Top surfaces
Smooth speed discontinuity area
✔
Smooth coefficient
80.0
Strength
Walls
Wall loops
2 - 3
For pins and power elements of the structure, such as the vehicle frame, use 3 loop
Detect thin wall
Disabled for vehicles and enabled for characters
Top/bottom shells
Top surface pattern
Monotonic
Top shell layers
5
For 0,2 Layer Height
Top shell thickness
1.00 mm
Top paint penetration layers
5
Bottom surface pattern
Monotonic
Bottom shell layers
5
Bottom shell thickness
1.00 mm
Bottom paint penetration layers
5
Internal solid infill pattern
Rectilinear
Sparse infill
Sparse infill density
6.0 %
Sparse infill pattern
Triangles
Length of sparse infill anchor
400.0 %
Maximum length of sparse infill anchor
20.0 mm
Advanced
Infill/Wall overlap
15.0 - 25.0 %
Infill direction
45.0 °
Bridge direction
0.0 °
Minimum sparse infill threshold
10.0 mm²
Detect narrow internal solid infill
✔
Ensure vertical shell thickness
Enabled
Detect floating vertical shells
✔
Speed
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v2, you can select the maximum recommended values
Initial layer speed
Initial layer
15.0 - 45.0 mm/sec
Initial layer infill
35.0 - 75.0 mm/sec
Other layers speed
Outer wall
30.0 - 150.0 mm/sec
Inner wall
30.0 - 250.0 mm/sec
Small perimeters
50.0 %
Small perimeter threshold
0.1 mm
Sparse infill
50.0 - 250.0 mm/sec
Internal solid infill
50.0 - 200.0 mm/sec
Vertical shell speed
80.0 %
Top surface
25.0 - 150.0 mm/sec
Slow down for overhangs
✔
Overhang speed
Overhang speed 10%
0.0 mm/sec
Overhang speed 25%
40.0 mm/sec
Overhang speed 50%
20.0 mm/sec
Overhang speed 75%
10.0 mm/sec
Overhang speed 100%
10.0 mm/sec
Bridge
20.0 - 40.0 mm/sec
Gap infill
30.0 - 150.0 mm/sec
Support
30.0 - 100.0 mm/sec
Support interface
30.0 - 60.0 mm/sec
Travel speed
Travel
80.0 - 350.0 mm/sec
Acceleration
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise
Normal printing
2,500.0 - 4,000.0 mm/sec²
Travel
2,000.0 - 7,000.0 mm/sec²
Initial layer travel
700.0 - 5,000.0 mm/sec²
Initial layer
300.0 - 500.0 mm/sec²
Outer wall
500.0 - 3,000.0 mm/sec²
Inner wall
500.0 - 4,000.0 mm/sec²
Top surface
500.0 - 2,500.0 mm/sec²
Sparse infill
100.0 - 100.0 %
Support
Support
Enable support
✔
Enable this parameter if your model requires supports
Type
Tree (auto)
Style
Default
Threshold angle
10.0 - 60.0 °
We also recommend placing and removing supports manually in some places using special button
Remove small overhangs
✔
Raft
Raft layers
0 layers
Advanced
Initial layer density
90.0 %
Initial layer expansion
-1.0 mm
Support wall loops
-1 - 2
1-2 loops for more thick support
Top Z distance
0.20 - 0.25 mm
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Bottom Z distance
Bottom Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Base pattern
Rectilinear
Base pattern spacing
2.50 mm
Pattern angle
0.0 °
Top interface layers
2 - 3 layers
Interface pattern
Concentric
Top interface spacing
0.00 - 0.50 mm
You have to calibrate this parameter which one is better for your filament
Normal Support expansion
0.00 mm
Support/object xy distance
0.35 - 0.80 mm
Increase this parameter if the supports are hard to remove from walls
Support/object first layer gap
0.35 mm
Max bridge length (only for tree supports)
1.0 mm
Independent support layer height
✔
Tree Support (only for tree supports)
Branch distance
5.0 mm
Branch diameter
2.0 mm
Branch angle
45.0 °
Branch diameter angle
5.0 °
Others
Bed adhesion
Skirt loops
0
Skirt height
1 layers
For PLA and PETG filament types
Brim type
Outer and inner brim
Brim width
5.00 mm
5-8 mm is optional for small prints that have bad adhesion to the build plate
Brim-object gap
0.01 - 0.12 mm
Prime tower
Enable
✔
Skip points
✔
Width
35.0 mm
Max speed
90.0 mm/sec
Brim width
3.0 mm
Infill gap
150.0 %
Rib wall
✔
Rib width
8.0 mm
Fillet wall
✔
Flush options
Flush into objects support
✔
Special mode
Slicing Mode
Regular
Print sequence
By layer
Timelapse
Traditional
G-code output
Reduce infill retraction
✔
Filament settings
Filament
Type
PLA
Filament ramming length
10.0 mm
Filament prime volume
45.0 mm³
Diameter
1.75 mm
Flow ratio
0.90 - 1.10
You have to calibrate this parameter
Shrinkage
100.0 %
Velocity Adaptation Factor
1.0
Softening temperature
45.0 - 80.0 ⁰C
Read the description on your filament roll
Travel time after ramming
0.0 sec
Precooling target temperature
0.0 ⁰C
Recommended nozzle temperature
190.0 - 270.0 ⁰C
Read the description on your filament roll and increase this parameter for fast printers
Print temperature
Cool Plate SuperTack
45.0 - 45.0 ⁰C
Cool Plate
35.0 - 35.0 ⁰C
Engineering Plate
0.0 - 0.0 ⁰C
Smooth PEI Plate / High
65.0 - 65.0 ⁰C
Temp Plate
65.0 - 65.0 ⁰C
Textured PEl Plate
65.0 - 65.0 ⁰C
Nozzle
220.0 - 270,200.0 ⁰C
Read the description on your filament roll and increase this parameter for fast printers
Volumetric speed limitation
Max volumetric speed
12.0 mm/sec
Ramming volumetric speed
-1.0 mm/sec
Filament scarf seam settings
Scarf start height
10.0 %
Scarf length
10.0 mm
Cooling
Cooling for specific layer
1 layers
No cooling for the first
1 layers
Part cooling fan
Min fan speed threshold
Fan speed
60.0 %
Layer time
90.0 sec
Max fan speed threshold
Fan speed
80.0 %
Layer time
8.0 sec
Keep fan always on
✔
Slow printing down for better layer cooling
✔
Min print speed
10.0 mm/sec
Force cooling for overhangs and bridges
✔
Cooling overhang threshold
50.0 %
Overhang threshold for participating cooling
100.0 %
Fan speed for overhangs
100.0 %
Pre start fan time
0.0 sec
Auxiliary part cooling fan
Fan speed
70.0 %
Printer Settings Tab
Motion ability
Jerk limitation
Maximum jerk X
7.0 mm/sec
Maximum jerk Y
7.0 mm/sec
Maximum jerk Z
0.4 mm/sec
Maximum jerk E
5.0 mm/sec
Extruder
Basic information
Type
Direct drive extruder
Nozzle diameter
0.40 mm
Nozzle volume
0.0 mm³
Layer height limits
Min
0.08 mm
Max
0.35 mm
Retraction
Length
0.70 mm
Z hop when retract
0.3 mm
Z hop lower boundary
0.0 mm
Z Hop Type
Normal
Retraction Speed
30.0 mm/sec
Deretraction Speed
30.0 mm/sec
Travel distance threshold
1.0 mm
Retract when change layer
✔
Wipe while retracting
✔
Wipe Distance
2.0 mm
Retract amount before wipe
70.0 %
Orca Slicer 2.0+ Settings name
Option
Quality Tab
Layer height
Layer Height
0.12 - 0.20 mm
For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
First layer height
0.20 - 0.28 mm
120-150% of your Layer Height
Line width
Default:
0.42 mm
Initial Layer
0.45 - 0.50 mm
Outer wall
0.42 mm
Inner wall
0.45 mm
Top surface
0.45 mm
Sparse infill
0.45 mm
Internal solid infill
0.45 mm
Support
0.42 mm
Seam
Seam position
Aligned
But you can paint the seam if you want.
Seam gap
10.0 %
Role base wipe speed
✔
Wipe speed
80.0 %
Precision
Slice gap closing radius
0.049 mm
Resolution
0.012 mm
X-Y hole compensation
0.01 mm
0.01-0.05 You have to calibrate this parameter
X-Y contour compensation
0.01 mm
0.01-0.05 You have to calibrate this parameter
Elephant foot compensation
0.10 mm
0.1-0.2 You have to calibrate this parameter
Elephant foot compensation layers
1 layers
Ironing
Ironing Type
No ironing
Wall generator
Wall generator
Arachne
Wall transitioning threshold angle (Arachne setting)
10.0 °
Wall transitioning filter margin (Arachne setting)
25.0 %
Wall transition length (Arachne setting)
100.0 %
Wall distribution count (Arachne setting)
1
First layer minimum wall width (Arachne setting)
85.0 %
Minimum wall width (Arachne setting)
85.0 %
Minimum feature size (Arachne setting)
25.0 %
Minimum wall length (Arachne setting)
0.50 mm
Walls and surfaces
Walls printing order
inner/outer
Wall loop direction
Auto
Top surface flow ratio
1.00
Bottom surface flow ratio
1.00
Only one wall on top surfaces
✔
One wall threshold
300.0 %
Bridging
Bridge flow ratio
0.95 - 1.05
Internal bridge flow ratio
0.95 - 1.05
External bridge density
100.0 %
Internal bridge density
100.0 %
Thick internal bridges
✔
Extra bridge layers (beta)
Disabled
Filter out small internal bridges
Filter
Bridge counterbore holes
None
Overhangs
Detect overhang walls
✔
Strength
Walls
Wall loops
For pins and power elements of the structure, such as the vehicle frame, use 3 loop
Detect thin walls
Disabled for vehicles and ships, enabled for characters
Top/bottom shells
Top shell layers
5 layers
For 0,2 Layer Height
Top shell thickness
1.00 mm
Top surface density
100 %
Top surface pattern
Monotonic line
Bottom shell layers
5 layers
For 0,2 Layer Height
Bottom shell thickness
1.00 mm
Bottom surface density
100.0 %
Bottom surface pattern
Monotonic
Top/Bottom solid infill/wall overlap
25.0 %
Infill
Sparse infill density
5.0 %
Fill Multiline
1.00
Sparse infill pattern
Triangles
Sparse infill direction
45.0 °
Maximum length of the infill anchor
20.0 mm
Sparse infill anchor length
400.0 %
Internal solid infill pattern
Monotonic
Solid infill direction
45.0 °
Apply gap fill
Nowhere
Filter out tiny gaps
0.00 mm
Infill/wall overlap
10.0 - 25.0 %
Advanced
External bridge infill direction
0.0 °
Internal bridge infill direction
0.0 °
Minimum sparse infill threshold
15.0 mm²
Detect narrow internal solid infill
✔
Ensure vertical shell thickness
All
Speed
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example, Anycubic Kobra 3 Or Bambulab A1, you can select the maximum recommended values.
First layer speed
First layer
15.0 - 45.0 mm/sec
First layer infill
35.0 - 75.0 mm/sec
Initial layer travel speed
50.0 %
Number of slow layers
2 layers
Other layers speed
Outer wall
30.0 - 150.0 mm/sec
Inner wall
30.0 - 250.0 mm/sec
Small perimeters
50.0 %
Small perimeter threshold
0.1 mm
Sparse infill
50.0 - 250.0 mm/sec
Internal solid infill
50.0 - 250.0 mm/sec
Top surface
30.0 - 150.0 mm/sec
Gap infill
30.0 - 200.0 mm/sec
Slow down by height
✘
Overhang speed
Slow down for overhangs
✔
Slow down for curled perimeters
✔
Overhang speed 10%, 25%
0.0 mm/sec
Overhang speed 25%, 50%
50.0 mm/sec
Overhang speed 50%, 75%
30.0 mm/sec
Overhang speed 75%, 100%
10.0 mm/sec
Bridge external
20.0 - 40.0 mm/sec
Bridge internal
30.0 mm/sec
Travel speed
Travel
100.0 - 300.0 mm/sec
Acceleration
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise
Normal printing
5,000.0 mm/sec²
Outer wall
3,000.0 mm/sec²
Inner wall
3,000.0 mm/sec²
Bridge
50.0 %
Sparse infill
100.0 %
Internal solid infill
100.0 %
First layer
300.0 mm/sec²
Top surface
3,000.0 mm/sec²
Travel
5,000.0 mm/sec²
accel to decel
50.0 %
Jerk(XY)
Default
9.0 mm/sec
Outer wall
7.0 mm/sec
Inner wall
7.0 mm/sec
Infill
10.0 mm/sec
Top surface
7.0 mm/sec
First layer
9.0 mm/sec
Travel
12.0 mm/sec
Support
Support
Enable support
✔
Enable this parameter if your model requires supports
Type
Tree (auto)
Style
Default
Threshold angle
60.0 °
We also recommend placing and removing supports manually in some places using special button
Threshold overlap
50.0 %
First layer density
90.0 %
First layer expansion
2.0 mm
Remove small overhangs
✔
Raft
Raft layers
0 layers
Advanced
Top Z distance
0.20 - 0.25 mm
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Bottom Z distance
0.20 - 0.25 mm
Bottom Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Support wall loops
0
Base pattern
Rectilinear
Base pattern spacing
2.50 mm
Pattern angle
0.0 °
Top interface layers
2 layers
Bottom interface layers
2 layers
Interface pattern
Rectilinear
Top interface spacing
0.00 mm
Bottom interface spacing
0.00 mm
Normal Support expansion
0.00 mm
Support/object xy distance
0.40 mm
Increase this parameter if the supports are hard to remove from walls
Support/object first layer gap
0.35 mm
Independent support layer height
✔
Tree Support (only for tree supports)
Tip Diameter
0.80 mm
Tree support branch distance
1.00 mm
Branch Density
30.0 %
Tree support branch diameter
2.0 mm
Branch Diameter Angle
5.0 °
Tree support branch angle
40.0 °
Preferred Branch
25.0 °
Others
Skirt
Skirt loops
0
Skirt type
Combined
Skirt minimum extrusion length
0.00 mm
Skirt distance
2.00 mm
Skirt start point
-135.0 °
Skirt speed
50.0 mm/sec
Skirt height
1.0 layers
For PLA and PETG filament types
Draft shield
Disabled
Brim
Brim type
Outer and inner brim
Brim width
5.0 mm
5-8 mm is optional for small prints that have bad adhesion to the build plate
Brim-object gap
0.01 - 0.12 mm
Special mode
Slicing Mode
Regular
Print sequence
By layer
Intra-layer order
Default
G-code output
Label objects
✔
Filename format
{input _filename_ base}_{print_time}.gcode
Filament Tab
Filament
Basic information
Type
PLA
Shrinkage (XY)
100.0 %
Shrinkage (Z)
100.0 %
Softening temperature
60.0 ⁰C
Read the description on your filament roll
Idle temperature
0.0 ⁰C
Recommended nozzle temperature
190.0 - 270.0 ⁰C
Read the description on your filament roll and increase this parameter for fast printers
Flow ratio and Pressure Advance
Flow ratio
0.90 - 1.10
You have to calibrate this parameter
Print chamber temperature
Chamber temperature
0.0 ⁰C
Print temperature
Nozzle
Read the description on your filament roll and increase this parameter for fast printers
First layer
190.0 - 270.0 ⁰C
Other layers
190.0 - 270.0 ⁰C
Bed temperature
Read the description on your filament roll
Cool Plate (SuperTack)
First layer
45.0 ⁰C
Other layers
45.0 ⁰C
Cool Plate
First layer
35.0 ⁰C
Other layers
35.0 ⁰C
Textured Cool Plate
First layer
40.0 ⁰C
Other layers
40.0 ⁰C
Engineering Plate
First layer
0.0 ⁰C
Other layers
0.0 ⁰C
Smooth PEI Plate / High Temp Plate
First layer
55.0 ⁰C
Other layers
55.0 ⁰C
Textured PEI Plate
First layer
55.0 ⁰C
Other layers
55.0 ⁰C
Volumetric speed limitation
Max volumetric speed
21.0 mm/sec
Cooling
Cooling for specific layer
No cooling for the first
1.0 layers
Full fan speed at layer
3.0 layers
Part cooling fan
Min fan speed threshold
Fan speed
70.0 %
Layer time
80.0 sec
Max fan speed threshold
Fan speed
80.0 %
Layer time
6.0 sec
Keep fan always on
✔
Slow printing down for better layer cooling
✔
Min print speed
9 mm/sec
Force cooling for overhangs and bridges
✔
Overhang cooling activation threshold
50.0 %
Overhangs and external bridges fan speed
100.0 %
Internal bridges fan speed
-1.0 %
Support interface fan speed
-1.0 %
Ironing fan speed
-1.0 %
Auxiliary part cooling fan
Fan speed
70.0 %
Exhaust fan
During print
69.9 %
Complete print
70.0 %
Printer Settings Tab
Basic information
This field is filled in according to your printer specifications when you add it to the slicer.
Machine G-code
You can add custom G-code here for the start and end of the print. However, be careful - this is for advanced users only!
Extruder 1
Size
Nozzle diameter
0.4 mm
Layer height limits
Min
0.1 mm
Max
0.3 mm
Retraction
You have to calibrate your printer using Ge retraction test models
Length
0.6 mm
Retraction Length: For direct-drive setups use 0.5 mm to 2.5 mm; for Bowden extruders use 5 to 7 mm
Extra length on restart
0.00 mm
Retraction speed
40 mm/sec
Deretraction speed
40.0 mm/sec
This is how fast the filament is pulled back—40-60 mm/s for direct drive and 30-50 mm/s for Bowden setups.
Travel distance threshold
1.00 mm
Retract on layer change
✔
Wipe while retracting
✔
Wipe distance
2.00 mm
Retract amount before wipe
70.0 %
Z-Hop
On surfaces
All surfaces
Z-hop type
Auto
Z-hop height
0.30 mm
You have to calibrate this parameter: Reduce it until the printer starts to hit the parts with the nozzle during printing, then increase it by 0.2.
Traveling angle
3.0 °
Only lift Z above
0.00 mm
Only lift Z below
0.00 mm
Retraction when switching material
Length
1.00 mm
Extra length on restart
0.00 mm
UltiMaker Cura 5.0+ Settings name
Option
Quality
Layer Height
0.12 - 0.20 mm
For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
Initial Layer Height
0.20 mm
120-150% of your Layer Height
Line Width
0.42 mm
Wall Line Width
0.40 mm
Outer Wall Line Width
0.40 mm
Inner Wall(s) Line Width
0.42 mm
Top/Bottom Line Width
0.44 mm
Infill Line Width
0.40 mm
Skirt/Brim Line Width
0.42 mm
Initial Layer Line Width
0.5 %
Walls
Wall Thickness
0.80 mm
Wall Line Count
2
To increase the strength of the print parts, use wall line count: 3
Wall Transition Length
0.20 mm
Wall Distribution Count
1
Wall Transitioning Threshold Angle
10.0 °
Wall Transitioning Filter Margin
0.10 mm
Outer Wall Wipe Distance
0.00 mm
Optimize Wall Printing Order
✔
Wall Ordering
Inside to Outsize
Minimum Wall Line Width
0.34 mm
Minimum Even Wall Line Width
0.34 mm
Minimum Odd Wall Line Width
0.34 mm
Print Thin Walls
✔
Minimum Feature Size
0.10 mm
Minimum Thin Wall Line Width
0.34 mm
Horizontal Expansion
0.00 mm
Initial Layer Horizontal Expansion
0.00 mm
Hole horizontal expansion
0.00 mm
Z Seam Alignment
User Specified
Z Seam Position
Back
Z Seam X
0.0 mm
Z Seam Y
200.0 mm
Top/Bottom
Top Surface Skin Layers
0 layers
Bottom Surface Skin Layers
0 layers
Top/Bottom Thickness
1.00 mm
Top Thickness
1.00 mm
Bottom Thickness
1.00 mm
Initial Bottom Layers
4 - 5 layers
Top/Bottom Pattern
Lines
Bottom Pattern Initial Layer
Lines
Extra Skin Wall Count
1
Enable Ironing
✘
Infill
For pins and connectors use 50% Infill
Infill Density
5.0 - 30.0 %
Infill Line Distance
6.00 mm
Infill Pattern
Triangles
Infill X Offset
0.00 mm
Infill Y Offset
0.00 mm
Infill Line Multiplier
1
Infill Overlap Percentage
30.0 %
Infill Overlap
0.12 mm
Infill Wipe Distance
0.00 mm
Infill Layer Thickness
0.20 mm
Gradual Infill Steps
0
Minimum Infill Area
0.00 mm²
Skin Edge Support Thickness
0.00 mm
Skin Edge Support Layers
0
Extra Infill Lines To Support Skins
Walls and Lines
Material
These parameters are for standard PLA plastic. If you are using a different type of plastic, check the printing temperature recommended by the manufacturer. Also, read the description on your filament spool. For fast printers, add +30 °C to the current parameters.
Printing Temperature
210.0 ⁰C
Printing Temperature Initial Layer
210.0 ⁰C
Initial Printing Temperature
210.0 ⁰C
Final Printing Temperature
210.0 ⁰C
Build Plate Temperature
60.0 ⁰C
Build Plate Temperature Initial Layer
60.0 ⁰C
Scaling Factor Shrinkage Compensation
100.0 %
Horizontal Scaling Factor Shrinkage Compensation
100.0 %
Vertical Scaling Factor Shrinkage Compensation
100.0 %
Flow
98.0 - 102.0 %
Speed
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v3, you can select the maximum recommended values
Print Speed
60.0 - 160.0 mm/sec
Infill Speed
60.0 - 160.0 mm/sec
Wall Speed
30.0 - 90.0 mm/sec
Outer Wall Speed
30.0 - 90.0 mm/sec
Inner Wall Speed
40.0 - 80.0 mm/sec
Top/Bottom Speed
40.0 - 100.0 mm/sec
Travel Speed
100.0 - 250.0 mm/sec
Initial Layer Speed
15.0 - 30.0 mm/sec
Initial Layer Print Speed
15.0 - 30.0 mm/sec
Initial Layer Travel Speed
100.0 - 150.0 mm/sec
Skirt/Brim Speed
20.0 - 30.0 mm/sec
Number of Slower Layers
2.0 layers
Flow Equalization Ratio
100.0 %
Enable Acceleration Control
✔
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise.
Print Acceleration
500.00 - 3,000.00 mm/sec²
Infill Acceleration
500.0 - 3,000.0 mm/sec²
Wall Acceleration
500.0 - 2,000.0 mm/sec²
Outer Wall Acceleration
500.0 - 2,000.0 mm/sec²
Inner Wall Acceleration
500.0 - 3,000.0 mm/sec²
Top/Bottom Acceleration
500.0 - 2,000.0 mm/sec²
Travel Acceleration
500.0 - 4,000.0 mm/sec²
Initial Layer Acceleration
500.0 - 1,000.0 mm/sec²
Initial Layer Print Acceleration
500.0 - 1,000.0 mm/sec²
Initial Layer Travel Acceleration
500.0 - 3,000.0 mm/sec²
Skirt/Brim Acceleration
500.0 - 2,500.0 mm/sec²
Travel
Enable Retraction
✔
Retraction Distance
0.8 mm
You need to calibrate this parameter using Gambody test models. These values are average values for a Direct Drive extruder; for a Bowden extruder, the values should be increased.
Retraction Speed
35.0 - 50.0 mm/sec
You need to calibrate this parameter using Gambody test models. These values are average values for a Direct Drive extruder; for a Bowden extruder, the values should be increased.
Retraction Retract Speed
40.0 mm/sec
Retraction Prime Speed
40.0 mm/sec
Retraction Extra Prime Amount
0.00 mm³
Retraction Minimum Travel
1.49 mm
Maximum Retraction Count
100
Minimum Extrusion Distance Window
2.00 - 3.00 mm
Combing Mode
All
Retract Before Outer Wall
✔
Layer Start X
0.00 mm
Layer Start Y
0.00 mm
Z Hop When Retracted
✔
Use this value other than 0 if your nozzle catches on the internal infill during travel moves. Try to keep this value as low as possible in height.
Cooling
Enable Print Cooling
✔
Fan Speed
100.0 %
Regular Fan Speed
100.0 %
Maximum Fan Speed
100.0 %
Regular/Maximum Fan Speed Threshold
10.0 sec
Initial Fan Speed
0.0 %
Regular Fan Speed at Height
0.5 mm
Regular Fan Speed at Layer
3 layers
Minimum Layer Time
5.0 sec
Minimum Speed
10.0 mm/sec
Cooling during extruder switch
Unchanged
Support
Generate Support
✔
Support Structure Normal
✔
Use normal supports to support large, straight surfaces (most mechanical or technical parts).
Support Z Seam Away from Model
Min Z Seam Distance from Model
0.80 mm
Support Placement
Everywhere
Support Overhang Angle
45.0 - 65.0 °
You have to calibrate this parameter according to the capabilities of your printer and your filament, using a Gambody test models.
Support Pattern
Zig Zag
Support Wall Line Count
0
Use 1 instead of 0 if your supports are thin and tall. They will be harder to remove, but much stronger.
Support Interface Wall Line Count
0
Support Roof Wall Line Count
0
Support Bottom Wall Line Count
0
Connect Support ZigZags
✔
Support Density
5.0 - 20.0 %
Support Line Distance
2.0 - 8.0 mm
Enable Support Brim
✔
Support Brim Width
4.0 mm
Support Brim Line Count
10
Support Z Distance
0.24 mm
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Support Top Distance
0.24 mm
Support Bottom Distance
0.24 mm
Support X/Y Distance
0.80 mm
Increase this parameter if the supports are hard to remove from walls
Support Distance Priority
X/Y overrides Z
Support Stair Step Height
0.00 mm
Support Join Distance
2.00 mm
Support Horizontal Expansion
0.80 mm
Support Infill Layer Thickness
0.20 mm
Gradual Support Infill Steps
0
Minimum Support Area
2.0 mm²
Enable Support Interface
✔
Enable Support Roof
✔
Enable Support Floor
✔
Support Interface Thickness
0.40 mm
Support Roof Thickness
0.40 mm
Support Floor Thickness
0.40 mm
Support Interface Density
33.33 - 33.33 %
Support Roof Density
33.33 - 33.33 %
Support Roof Line Distance
2.40 mm
Support Floor Density
33.3 - 33.3 %
Support Floor Line Distance
2.40 mm
Support Interface Pattern
Concentric
Support Roof Pattern
Concentric
Support Floor Pattern
Concentric
Minimum Support Interface Area
10.0 mm²
Minimum Support Roof Area
10.0 mm²
Minimum Support Floor Area
10.0 mm²
Support Interface Horizontal Expansion
0.0 mm
Support Roof Horizontal Expansion
0.0 mm
Support Floor Horizontal Expansion
0.0 mm
Use Towers
✔
Tower Diameter
3.0 mm
Maximum Tower-Supported Diameter
3.0 mm
Tower Roof Angle
65.0 °
Support Structure Tree
✔
Use tree supports to support complex objects, such as characters.
Maximum Branch Angle
45.0 °
You have to calibrate this parameter according to the capabilities of your printer and your filament, using a Gambody test models.
Branch Diameter
5.0 mm
Trunk Diameter
25.0 mm
Branch Diameter Angle
7.0 °
Support Z Seam Away from Model
✔
Min Z Seam Distance from Model
0.80 mm
Support Placement
Everywhere
Preferred Branch Angle
30.0 °
Diameter Increase To Model
1.0 mm
Minimum Height To Model
3.0 mm
Initial Layer Diameter
7.5 mm
Branch Density
30.0 %
Tip Diameter
0.8 mm
Limit Branch Reach
✔
Optimal Branch Range
30.0 mm
Rest Preference
On model if required
Support Overhang Angle
45.0 °
Support Pattern
Zig Zag
Support Wall Line Count
1
Support Interface Wall Line Count
0
Support Roof Wall Line Count
0
Support Bottom Wall Line Count
0
Connect Support ZigZags
✔
Support Density
0.0 %
Support Line Distance
0.0 %
Initial Layer Support Line Distance
0.0 %
Support Infill Density Multiplier Initial Layer
1
Enable Support Brim
✔
Support Brim Width
4.0 mm
Support Brim Line Count
10
Support Z Distance
0.24 mm
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Support Top Distance
0.22 mm
Support Bottom Distance
0.22 mm
Support X/Y Distance
0.22 mm
Increase this parameter if the supports are hard to remove from walls
Support Distance Priority
X/Y overrides Z
Minimum Support Area
0.00 mm²
Enable Support Interface
✔
Enable Support Roof
✔
Enable Support Floor
✔
Support Interface Thickness
0.80 mm
Support Roof Thickness
0.80 mm
Support Floor Thickness
0.80 mm
Support Interface Density
33.33 mm
Support Roof Density
33.33 %
Support Floor Density
2.39 %
Support Interface Pattern
Grid
Support Roof Pattern
Grid
Support Floor Pattern
Grid
Minimum Support Interface Area
10.00 mm²
Minimum Support Roof Area
10.00 mm²
Support Interface Horizontal Expansion
0.00 mm
Support Roof Horizontal Expansion
0.00 mm
Support Floor Horizontal Expansion
0.00 mm
Support Interface Priority
Interface preferred
Build Plate Adhesion
Build plate type: Skirt
Use a skirt for all parts when printing on outdated printers.
Skirt Line Count
3.00
Skirt Height
3.00
Skirt Distance
10.00 mm
Skirt/Brim Minimum Length
250 mm
Build plate type: Brim
Use a brim when printing thin but tall parts, as well as parts with a small bed adhesion area.
Skirt/Brim Minimum Length
250.0 mm
Brim Width
10.0 mm
Brim Line Count
25
Brim Distance
0.0 mm
Brim Location
Outside Only
Brim Avoid Margin
1.6 mm
Smart Brim
✔
Z Offset
0.0 mm
PrusaSlicer 2.0+ Settings name
Option
Print Settings Tab
Layers and perimeters
Layer height
Layer Height
0.12 - 0.20 mm
For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
First layer height
0.18 - 0.28 mm
120-150% of your Layer Height
Vertical shells
Perimeters
2 - 3
Horizontal shells
Solid layers top
4
for 0.2 Layer Height
Solid layers bottom
4
Minimum shell thickness top
0.80 mm
Minimum shell thickness bottom
0.80 mm
Quality (slower slicing)
Extra perimeters if needed
✔
Ensure vertical shell thickness
Enabled
Advanced
Seam position
Aligned
But you can paint the seam if you want.
Seam gap distance
15.0 %
Scarf joint placement
Nowhere
External perimeters first
✔
Fill gaps
✔
Perimeter generator
Arachne
Fuzzy skin (experimental)
Fuzzy Skin
None
Fuzzy skin thickness
0.30 mm
Fuzzy skin point distance
0.80 mm
Only one perimeter
Single perimeter on top surfaces
Disabled
Infill
Infill
Fill Density
6.0 %
Fill Pattern
Triangles
Length of the infill anchor
10.00 mm
Maximum length of the infill anchor
10.00 mm
Top Fill Pattern
Monotonic Lines
Bottom fill pattern
Monotonic Lines
Ironing
Enable ironing
✘
Skirt and brim
Skirt
Loops (minimum)
0
Distance from brim/object
6.00 mm
Skirt height
1 layers
(for PLA and PETG)
Minimal filament extrusion length
50.00 mm
Brim
Brim type
Outer brim only
Brim width
5.00 - 8.00 mm
(5-8 mm is optional for small prints that have bad adhesion to the build plate)
Brim separation gap
0.12 mm
Support material
Support material
Generate support material
✔
Enable this parameter if your model requires supports
Auto generated supports
✔
Overhang threshold
60.0 °
(45-50 degree)You have to calibrate this parameter according to the capabilities of your printer
and your filament, using a Gambody test models.
Enforce support for the first
2 layers
First layer density
90.0 %
First layer expansion
3.0 mm
Raft
Raft layers
0 layers
Options for support material and raft
Style
Grid
Top contact Z distance
0.24 mm
Top contact Z distance = 1-1.3 layer Height. If the supports are hard to remove, try
increasing this setting by 0.1-0,4 mm
Bottom contact Z distance
0.24 mm
Top contact Z distance = 1-1.3 layer Height. If the supports are hard to remove, try
increasing this setting by 0.1-0,4 mm
Pattern
Rectilinear
Pattern spacing
2.5 mm
Pattern angle
0.0 °
Top interface layers
2 layers
Bottom interface layers
2 layers
Interface pattern
Concentric
Intertace pattern spacing
0.00 mm
XY separation between an object and its support
1.00 mm
Increase this parameter if the supports are hard to remove from walls
Don't support bridges
✔
Organic supports
Maximum Branch Angle
45.0 °
Preferred Branch Angle
30.00 °
Branch Diameter
2.00 mm
Branch Diameter Angle
5.00 °
Branch Diameter with double walls
3.00 mm
Tip Diameter
0.80 mm
Branch Distance
1.00 mm
Branch Density
30.0 %
Speed
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v3, you can select the maximum recommended values
Speed for print moves
Perimeters
25.0 - 200.0 mm
Small perimeters
25.0 - 150.0 mm
External perimeters
25.0 - 200.0 mm/sec
Infill
50.0 - 250.0 mm/sec
Solid infill
40.0 - 200.0 mm/sec
Top solid infill
25.0 - 200.0 mm/sec
Support material
50.0 - 300.0 mm/sec
Support material interface
100.0 - 100.0 %
Bridges
25.0 - 100.0 mm/sec
Over bridges
25.0 - 100.0 mm/sec
Gap fill
25.0 - 100.0 mm/sec
Ironing
15.0 - 80.0 mm/sec
Dynamic overhang speed
speed for 0% overlap (bridge)
0.0 mm/sec
speed for 25% overlap
0.1 mm/sec
speed for 50% overlap
0.0 mm/sec
Speed for non-print moves
Travel
100.0 - 150.0 mm/sec
Modifiers
First layer speed
15.0 - 30.0 mm/sec
Speed of object first layer over raft interface
15.0 - 30.0 mm/sec
Acceleration control (advanced)
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise. Use the minimum value for outdated printers without acceleration calibration, and the maximum value for modern printers if you need it.
External perimeters
500.00 - 3,000.00 mm/sec²
Perimeters
500.00 - 4,000.00 mm/sec²
Top solid infill
500.00 - 1,500.00 mm/sec²
Solid infill
500.00 - 4,000.00 mm/sec²
Infill
500.00 - 3,000.00 mm/sec²
Bridge
500.00 - 4,000.00 mm/sec²
First layer
500.00 - 1,000.00 mm/sec²
First object layer over raft interface
500.00 - 3,000.00 mm/sec²
Wipe tower
500.00 - 4,000.00 mm/sec²
Travel
500.00 - 7,000.00 mm/sec²
Travel short distance acceleration
500.00 - 6,000.00 mm/sec²
Default
500.00 - 4,000.00 mm/sec²
Multiple Extruders
These settings only work for 3D printers with multiple extruders
Extruders
Perimeter extruder:
1
Infill extruder:
1
Solid infill extruder
1
Advanced
Extrusion width
You can try setting all parameters in this section, except the First layer, to values between 0.75% of your nozzle diameter and 1.25% of your nozzle diameter. Adjusting them will help you work out the optimal parameters for the best quality for your print. As for the First layer, you can set it to 150% of the diameter of your nozzle for better adhesion to the build plate (for a nozzle with a diameter of 0.4 mm, the First layer extrusion width can be from 0.3 mm to 0.5 mm)
Default extrusion width
0.44 mm
First layer
0.4 %
Perimeters
0.44 mm
External perimeters
0.42 mm
Infill
0.44 mm
Solid infill
0.44 mm
Top solid infill
0.40 mm
Support material
0.36 mm
Overlap
Infill/perimeters overlap:
25.0 %
Flow
Bridge flow ratio:
0.95
Arachne perimeter generator
Perimeter transitioning threshold angle
10.0 °
Perimeter transitioning filter margin
25.0 %
Perimeter transition length
100.0 %
Perimeter distribution count
1
Minimum perimeter width
85.0 %
Minimum feature size
24.9 %
Filament Settings Tab
Filament
Filament
PLA
Diameter
0.40 mm
Extrusion multiplier
1.0
For better printing quality you have to calibrate this parameter using Gambody test model.
Temperature
Check your filament manufacturer's temperature recommendations on the spool.
Cooling
Cooling parameters depends on the material you use for printing.
Enable auto cooling
✔
Cooling slowdown logic
Uniform cooling
Perimeter transition distance
0.00 mm
Fan settings
Fan speed
*for PLA
Min
50.0 %
Max
100.0 %
Bridges fan speed
100.0 %
Disable fan for the first
2.0 layers
Full fan speed at layer
4.0 layers
Cooling thresholds
Enable fan if layer print time is below
600.0 sec
Slow down if layer print time is below
9.0 sec
Min print speed
20.0 mm/sec
Slic3r 1.3+ Settings name
Option
Print Settings Tab
Layers and perimeters
Layer height
Layer height
0.12 mm
For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
First layer height
0.18 mm
120-150% of your Layer Height
Vertical shells
Perimeters
2
Horizontal shells
Solid layers top
8 layers
For 0.12 Layer Height
Solid layers bottom
8 layers
For 0.12 Layer Height
Quality (slower slicing)
Extra perimeters if needed
✔
Avoid crossing perimeters
✔
Detect thin walls
✘
Detect bridging perimeters
✘
Advanced
Seam position
Aligned
External perimeters first
✘
Infill
Infill
Fill density
5.0 %
For pins and connectors use 50% Infill
Fill pattern top
Rectilinear
Fill pattern bottom
Rectilinear
Reducing printing time
Combine infill every
2 layers
Advanced
Fill gaps
✔
Solid infill every
0 layers
Fill angle:
45.0 °
Solid infill threshold area
70 mm²
Only retract when crossing perimeters
✔
Infill before perimeters
✘
Skirt and brim
Skirt
Use skirt for outdated 3d printers
Loops (minimum)
3
Distance from object
5.00 mm²
Skirt height
1 layers
Minimum extrusion length
50.0 mm
Brim
(5-8 mm is optional for small prints that have bad adhesion to the build plate)
Exterior brim width
8.00 mm
Interior brim width
3.00 mm
Support material
Support material
Generate support material
✔
Enable this parameter if your model requires supports
Overhang threshold
60.0 %
(45-60 degree)You have to calibrate this parameter according to the capabilities of your printer and your filament, using a Gambody test models
Options for support material and raft
Contact Z distance:
0.15 mm
Contact Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Pattern
rectilinear
Pattern spacing
2.50 mm
Pattern angle
0.0 °
Interface layers
3 layers
Interface pattern spacing
0.00 mm
Speed
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v3, you can select the maximum recommended values
Speed for print moves
Perimeters
25.0 - 200.0 mm/sec
small
52.0 - 90.0 mm/sec
external
25.0 - 90.0 mm/sec
Infill
50.0 - 160.0 mm/sec
solid
25.0 - 160.0 mm/sec
top solid
25.0 - 100.0 mm/sec
gaps
25.0 - 160.0 mm/sec
Bridges
25.0 - 50.0 mm/sec
Support material
50.0 - 200.0 mm/sec
interface
100.0 %
Speed for non-print moves
Travel:
100 - 250 mm/sec
Modifiers
First layer speed
15.00 - 30.00 mm/sec
Acceleration control (advanced)
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise. Use the minimum value for outdated printers without acceleration calibration, and the maximum value for modern printers if you need it.
Perimeters:
500 - 3,000 mm/sec²
Infill:
500 - 3,000 mm/sec²
Bridge:
500 - 3,000 mm/sec²
First layer:
500 - 1,000 mm/sec²
Default:
500 - 4,000 mm/sec²
Advanced
Extrusion width
Default extrusion width: auto
✔
Filament Settings Tab
Filament
Filament
Diameter
0.40 mm
Extrusion multiplier
1.00
You have to calibrate this parameter from 0.9 to 1.1 according to the capabilities of your printer and your filament, using a Gambody test models.
Temperature
Check your filament manufacturer's temperature recommendations on the spool.
Extruder first layer
220.0 ⁰C
Extruder other layers
220.0 ⁰C
Bed first layer
60.0 ⁰C
Bed other layers
60.0 ⁰C
Cooling
Cooling parameters depends on the material you use for printing.
Enable
Keep fan always on
✔
Fan settings
Fan speed
80.0 - 100.0 %
Bridges fan speed
100.0 %
Disable fan for the first
1 layers
Cooling thresholds
Enable fan if layer print time is below
60.0 sec
Slow down if layer print time is below
5.0 sec
Min print speed
10.0 mm/sec
Printer Settings Tab
General
Size and coordinates
Z offset
0.00 mm
Calibrate this value if you need to reduce or improve the adhesion between the plastic and the heat bed
Capabilities
Extruders
1
Has heated bed
✔
Extruder
Size
Nozzle diameter:
0.40 mm
Your current nozzle diameter
Retraction
You need to calibrate this parameter using Gambody test models. These values are average values for a Direct Drive extruder; for a Bowden extruder, the values should be increased.
Length
1.00 mm
Lift Z
0.30 mm
Speed
45.00 mm/sec
Extra length on restart
0.00 mm
Minimum travel after retraction
2.00 mm
Simplify3D 5.0+ Settings name
Option
Extruder
General
Nozzle diameter
0.4 mm
Your current nozzle diameter
Extrusion Multiplier
0.98
You have to calibrate this parameter using Gambody test models.
Extrusion Width
Automatic
✔
Ooze Control
Use Retraction
✔
You need to calibrate this parameter using Gambody test models. These values are average values for a Direct Drive extruder; for a Bowden extruder, the values should be increased.
Retract Distance
0.80 mm
Retract Vertical Lift
1.00 mm
Retract Speed
40.00 mm/sec
Layer
General
Primary Extruder
Primary Extruder
Layer Height
0.12 - 0.20 mm
For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
Top Solid Layers
5
For 0,2 Layer Height
Bottom Solid Layers
5
For 0,2 Layer Height
Outline Perimeters
2
To increase the strength of the print parts, use Outline Perimeters: 3
Adaptive Layer Height
Enable Adaptive Layer Heights
✔
You can enable this parameter to print rounded or spherical models, as well as character models.
Minimum Adaptive Layer Height
0.08 mm
Maximum Adaptive Layer Height
0.24 mm
Adaptive Smoothing Level
5.0
Dimensional Adiustments
Horizontal Outer Size Compensation
0.00 mm
Use this option only if your parts are too tight. but better calibrate your printer extrusion
Horizontal Inner Size Compensation
0.00 mm
Use this option only if your parts are too tight. but better calibrate your printer extrusion
First Layer Settings
First Layer Height
100.0 %
First Layer Width
150.0 %
First Layer Speed
30.0 %
Start Point Selection
Optimize start points for fastest printing
✔
Restrict start points to preferred regions
✔
Printing Order
Outline Printing Order
Inside-Out
Island Printing Order
Minimize Print Time
Additions
Use Skirt/Brim
Skirt Extruder
Primary extruder
Skirt Layers
1 layers
Skirt Offset
0.00 mm
Use 2 and more if you want to create skirt instead brim
Skirt Outlines
1-2 for skirt and 10-20 for brim
Use Raft
✘
Use Prime Pillar
✘
Use for wipe nozzle if you need
Use Ooze Shield
✘
Use For ABS filament
Infill
Sparse Internal Infill
Internal Infill Pattern
Gyroid
Internal Pattern Rotation
0.0 °
Infill Percentage
7.0 %
For pins and connectors use 50% Infill
Infill Extrusion Width
100.0 %
Combined Infill Layers
2 layers
Outline Overlap
15.0 %
Minimum Infill Length
5.00 mm
Dense Internal Infill
Dense Infill Layers
0 layers
Dense Infill Percentage
50.0 %
Solid Layers
External Infill Pattern
Rectilinear
External Pattern Rotation
0 °
Solid Infill Threshold Area
25.00 mm²
Solid Infill Extra Expansion
0.00 mm
Add Solid Diaphragms
✘
Support
General
Support Extruder
All Extruders
Support Infill Pattern
Aligned
Support Pattern Rotation
0.0 °
Support Infill Percentage
30.0 %
Support Outlines
0.00
Base Support Layers
0 layers
Support inflation Distance
-0.01 mm
Combined Support Layers
1 layers
Dense Supports
Upper Dense Support Layers
0 layers
Lower Dense Support Layers
0 layers
Dense Support Infill Percentage
70.0 %
Dense Support Extra Expansion
0.00 mm
Part Separation
Support Horizontal Offset from Part
0.24 mm
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Temperature
Extruder
General
Enable temperature controller
✔
Temperature Number
T0
Temperature Type
Extruder
Stabilize temperature controller at beginning of print
✔
Per-Layer Setpoints
Calibrate your filament and detect optimal temperature for it
Temperature
230.0 ⁰C
Idle Cooldown
Cooldown Extruder While Ide
✘
Heated Bed
General
Enable temperature controller
✔
Stabillze temperature controller at beginning of print
✔
Per-Layer Setpoints
Average temperature for PLA filament
Temperature
60.0 ⁰C
Idle Cooldown
Cooldown Extruder While Ide
✘
Cooling
Per-Layer Setpoints
Fan Speed Setpoints
Setpoint 1
Fan Speed Percentage
0.0 %
At layer
1 layers
Setpoint 2
Fan Speed Percentage
100.0 %
At layer
2 layers
Speeds
General
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v3, you can select the maximum recommended values
Default Printing Speed
40 - 160 mm/sec
Outer Perimeter Speed
50.0 %
Inner Perimeter Speed
80.0 %
Solid Infill Speed
80.0 %
Sparse Support Speed
80.0 %
Dense Support Speed
70.0 %
XY Travel Speed
200.0 mm/sec
Z Travel Speed
15.0 mm/sec
Time Estimation
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise.
XY Acceleration
500.0 - 3,000.0 mm/sec²
Z Acceleration
150.0 - 600.0 mm/sec²
Extruder Acceleration
1,000.0 - 4,000.0 mm/sec²
XY Jerk
10.00 - 25.00 mm/sec
Z Jerk
0.30 - 0.50 mm/sec
Extruder Jerk
5.00 - 5.00 mm/sec
Speed Overrides
Reduce print speed for excessively quick layers
✔
Begin reducing speed for layers below
15.0 sec
Minimum quick layer speed percentage
20.0 %
Reduce print speed for short perimeters
Begin reducing speed for perimeters below
80.00 mm
Minimum short perimeter speed percentage
50.0 %
Other
Bridging
Unsupported area threshold
50.00 mm²
Extra inflation distance
1.00 mm
Bridging extrusion multiplier
95.0 %
Bridging speed multiplier
30.0 %
Filament Properties
Filament diameter
1.75 mm
Advanced
Thin Wall Behavior
External Thin Wall Type
Perimeters only
Internal Thin Wall Type
Allow gap fill
Allowed Perimeter Overlap
10.0 %
Single Extrusions
Minimum Single Extrusion Length
1.00 mm
Minimum Single Extrusion Width
50.0 %
Maximum Single Extrusion Width
200.0 %
Single Extrusion Endpoint Extension
0.20 mm
Ooze Control Behavior
Only retract when crossing open spaces
✔
Force retraction between layers
✔
Update History
Version history:
All versions
All versions
Selected
Version 1.1 - Minor modification
FFF/FDM
Released 30 Jul 2024
Version 1.0 - Initial
FFF/FDM
Released 16 Mar 2021
Comments
